Jump to content
SAU Community

Recommended Posts

Hey guy,

as in the title my 350gt-8CVT is about to get the 80k major service with need to have CVT oil flush...

as far as i know, its gonna required 2 cans of 4lt (it required 7.8lt(?) correct me if i am wrong).

so before i go Nissan Aust or the NZ CVT seller i would take my luck to see if you guys have some bargains~ :D

manage to organised 1 can and prob another half can from one of forum member~so far...(unsure if it can be reused once its opened)

any1 has got spare can or "opened" left overs if you can tell me its can be reused once its opened~

PM me with the price for pick up in melb or with potage if you can ship to Melb~

Cheers guys~

Maybe ask Jon at Carizma, Richmond. He'll be able to get some for you. Just let him know his best customer, Nelson, referred you.

I am definitely going to see him when I need CVT oil. He has the network to source it for u from Japan...Even parts for the V35....

Maybe ask Jon at Carizma, Richmond. He'll be able to get some for you. Just let him know his best customer, Nelson, referred you.

I am definitely going to see him when I need CVT oil. He has the network to source it for u from Japan...Even parts for the V35....

So your Mrs wanted a non-turbo 4 door auto, but you miss having a Porsche? Then get the Porsche Panamera, I've test driven it and its a serious consideration, I've finally had enough of the issues I have to deal with having an import.

So your Mrs wanted a non-turbo 4 door auto, but you miss having a Porsche? Then get the Porsche Panamera, I've test driven it and its a serious consideration, I've finally had enough of the issues I have to deal with having an import.

what issues you been having mike?

what issues you been having mike?

Nothing too serious, just changed my expectations when it comes to cars. I've always had a soft spot for imports, but now I place more importance on integrated sat-nav that actually works and english menu items etc. The japanese import car charm has worn off now, time to join the EU I think, haha.

I believe that you will need almost 12 litres for a flush. I also have 8 litres that I brought back from Tokyo but will need to source another 4 litres. Please update us if you are successful with Carizma. It cost me $560 for 8 litres.

I believe that you will need almost 12 litres for a flush. I also have 8 litres that I brought back from Tokyo but will need to source another 4 litres. Please update us if you are successful with Carizma. It cost me $560 for 8 litres.

$560 for 8lt. is quite cheap, is that the price when u bought in Japan? becauses there is just no way to get 8Lt with $560 in Oz at all, I would buy all 8lt off you for $800~ :P

The car manaul show 8lt for CVT flush, but guess I would need to contact Nissan to confirm it.

i would like to know the same as well.

How often you need to change the fluid? Every 36 months or 80,000km?

Can't Nissan dealer change it for us? since the 350z comes with the same auto transmission on the 5 speed.

cheers

i would like to know the same as well.

How often you need to change the fluid? Every 36 months or 80,000km?

Can't Nissan dealer change it for us? since the 350z comes with the same auto transmission on the 5 speed.

cheers

I hope you're not suggesting that the 350z has the same auto transmission, as it is completely different.

I'll set the record straight as there seems to be a lot of people unsure of the details to do with the CVT.

I did the research and came up with this:

*The Nissan Extroid CVT is found in the 350GT-8 aswell as the Cedric and Gloria, but those last two had an earlier 6 speed version.

*The transmission is made for Nissan by a company called Jatco Ltd (scroll to the bottom), model designation JR006E.

*The half toroidal 'rollers' contained in that transmission are manufactured by NSK Global.

*The special oil is manufactured for Nissan by a huge company called Idemitsu Kosan.

*Based on the research data from the aforementioned company, the oil starts to lose its integrity at around the 120k mark, however Nissan recommends at or before the 100k mark.

*Some dealers will change the oil for you, others won't, depends on how much of a risk they perceive it to be, I'm sure you'll find someone to do it. Just make sure they accept liability in the event there is an issue.

The oil was developed to solve a specific problem, that is to provide traction between two surfaces under great pressure, (half toroidal rollers) in addition to being able to handle temps around 200 degrees. Strangely enough it also provides lubrication for all the other moving parts, its only when placed under great pressure that the molecules bond, therefore providing a relatively solid tractive surface for the rollers.

And yes, the oil is not cheap, but unfortunately no one makes an alternative.

Edited by GoldV35

Thank you for the summary as it sums everything up nicely. Given at the time that Toroidal CVT was developed it was a good idea but not sure because of the complexity that more things could go wrong therefore low adoption or is it because the development/cost of fluid to fulfill the needs.

Thank you for the summary as it sums everything up nicely. Given at the time that Toroidal CVT was developed it was a good idea but not sure because of the complexity that more things could go wrong therefore low adoption or is it because the development/cost of fluid to fulfill the needs.

I think it could be due to a few reasons, cost obviously being a big issue. That would only go down if consumer uptake increased which would in turn lead to further development and improvements to the manufacturing that in turn would lower cost.

Car makers such as Mercedes Benz, BMW and Audi have 7 and 8 speed DSG boxes now, and it won't be too long before this technology filters down to the cheaper segment cars. And when they do, they will essentially render the toroidal CVT redundant, as they are almost as smooth and economical, most importantly though, cheaper. So there is no point developing the toroidal CVT any further IMO, and I think the execs at Nissan recognise this.

In addition, the belt/chain drive CVT's currently in use are making advancements, improving and from what I can see they have the small to medium car segment tightly in their grasp.

Car makers such as Mercedes Benz, BMW and Audi have 7 and 8 speed DSG boxes now, and it won't be too long before this technology filters down to the cheaper segment cars. And when they do, they will essentially render the toroidal CVT redundant, as they are almost as smooth and economical, most importantly though, cheaper. So there is no point developing the toroidal CVT any further IMO, and I think the execs at Nissan recognise this.

In addition, the belt/chain drive CVT's currently in use are making advancements, improving and from what I can see they have the small to medium car segment tightly in their grasp.

Yes the traditional CVTs are making great leaps and are available in Oz across all segments.. because of their inherent efficientcies. A CVT works much better with a smaller engine due to its ability to keep the engine running at peak torque as much as possible. This is not possible with even the best DSG type transmission. That is why Audi still use CVT in their 2wd A4s but DSG in the A3's and the Quatro A4's. But the big Audis, the A6, A8, Q7 are all manily conventional slushmatic autos, same for Merc and BMW.

Nissan and Audi are the only people to fit CVT to larger 6 cylinder vehicles and I think that these manily FWD vehicles are not producing more torque than these transmissions can take. However, the Toroidal CVT used in RWD applications had to be capable of handling more torque and hence has this special oil and other things. FWD cars just tend to wheelspin away exces torque, but with RWD, it just loads up the transmission, until it breaks traction, or the gearbox..

However, the DSG is getting there. As a manual replacement, it works well, and with each upgrade gets closer to acceptable auto preformance for the masses..

So drive your GT-8 and enjoy it!! It is a fantastic transmission linked to a fantastic engine... It was just too good and advanced to survive out side the most exact service requirements... And as we have found, not all Japanese owners are as diligent with their servicing as we would have hoped...

So drive your GT-8 and enjoy it!! It is a fantastic transmission linked to a fantastic engine... It was just too good and advanced to survive out side the most exact service requirements... And as we have found, not all Japanese owners are as diligent with their servicing as we would have hoped...

You took the words rite outta my mouth~~~~~

As i keep saying, if someone was to swap me a 5 spd auto (apples with apples), I would keep my CVT anyday of the week....You guys who don't own one are missing out....Yes, so what, they are expensive to maintain when it comes to the fluids, but so is your girlfriend or wife....

I rest my case...

hold up one sec im slightly confused... ill try to make this easy to understand and hope someone can give me an answer.

1.this post is regarding to a gt8cvt right?

2.pw350gt is refering to a 5speed cvt auto? isnt this the same as the 350z? so nissan can do it?

3.i would understand that nissan cannot change it for the gt8cvt but can for the coupe cvt5speed? am i right or missing a point?

hope im not confusing anyone.

hold up one sec im slightly confused... ill try to make this easy to understand and hope someone can give me an answer.

1.this post is regarding to a gt8cvt right?

2.pw350gt is refering to a 5speed cvt auto? isnt this the same as the 350z? so nissan can do it?

3.i would understand that nissan cannot change it for the gt8cvt but can for the coupe cvt5speed? am i right or missing a point?

hope im not confusing anyone.

I can't believe people are still asking these questions when I laid it all out on a silver platter for them in post #11, I feel like I'm taking crazy pills.

Maybe this will help all those new to V35s....

V35s came in:

1. 6 speed manual

2. 5 speed tiptronic auto

3. 8 speed CVT tiptronic auto (only made for V35 sedans, Series 1)

How do you know if you have a CVT? look at the shift lever surround, it will say CVT....

If you don't have a CVT, your 5 speed auto will take on the generic auto transmission oil (readily available). If you have the CVT, it needs a not-so-readily-available auto transmission oil....

My preference is for a CVT gearbox as in normal bumper-to-bumper driving and highway cruising, the CVT changes gears smoothly at under 2,000 rpms in DRIVE gear = fuel economy. But when u slap it into tiptronic mode, it changes it characteristics and can rev to almost redline....just make sure that when u do use the tiptronic, to let your foot off the accelerator, change gear, then step on the accelerator...This 'TIP' is for those who have come from a manual transmission setup....You wouldn't change gears without clutching; would u? So please, despite the way how many drive tiptronics (like Top Gear), if u wanna prolong your auto transmission, ease off the gas b4 u change gears...Obviously this doesnt apply when u r in the DRIVE gear...

My 2 cents worth anyway....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
    • Every one has seemed to of have missed . . . . . . . The Mazda Cosmo . . . . . . what a MACHINE ! !
×
×
  • Create New...