Jump to content
SAU Community

Need Cvt Oil (a.k.a Liquid Gold!) For The 80k Major Service


Recommended Posts

Hey guy,

as in the title my 350gt-8CVT is about to get the 80k major service with need to have CVT oil flush...

as far as i know, its gonna required 2 cans of 4lt (it required 7.8lt(?) correct me if i am wrong).

so before i go Nissan Aust or the NZ CVT seller i would take my luck to see if you guys have some bargains~ :D

manage to organised 1 can and prob another half can from one of forum member~so far...(unsure if it can be reused once its opened)

any1 has got spare can or "opened" left overs if you can tell me its can be reused once its opened~

PM me with the price for pick up in melb or with potage if you can ship to Melb~

Cheers guys~

Link to comment
Share on other sites

Maybe ask Jon at Carizma, Richmond. He'll be able to get some for you. Just let him know his best customer, Nelson, referred you.

I am definitely going to see him when I need CVT oil. He has the network to source it for u from Japan...Even parts for the V35....

Link to comment
Share on other sites

Maybe ask Jon at Carizma, Richmond. He'll be able to get some for you. Just let him know his best customer, Nelson, referred you.

I am definitely going to see him when I need CVT oil. He has the network to source it for u from Japan...Even parts for the V35....

So your Mrs wanted a non-turbo 4 door auto, but you miss having a Porsche? Then get the Porsche Panamera, I've test driven it and its a serious consideration, I've finally had enough of the issues I have to deal with having an import.

Link to comment
Share on other sites

So your Mrs wanted a non-turbo 4 door auto, but you miss having a Porsche? Then get the Porsche Panamera, I've test driven it and its a serious consideration, I've finally had enough of the issues I have to deal with having an import.

what issues you been having mike?

Link to comment
Share on other sites

what issues you been having mike?

Nothing too serious, just changed my expectations when it comes to cars. I've always had a soft spot for imports, but now I place more importance on integrated sat-nav that actually works and english menu items etc. The japanese import car charm has worn off now, time to join the EU I think, haha.

Link to comment
Share on other sites

I believe that you will need almost 12 litres for a flush. I also have 8 litres that I brought back from Tokyo but will need to source another 4 litres. Please update us if you are successful with Carizma. It cost me $560 for 8 litres.

Link to comment
Share on other sites

I believe that you will need almost 12 litres for a flush. I also have 8 litres that I brought back from Tokyo but will need to source another 4 litres. Please update us if you are successful with Carizma. It cost me $560 for 8 litres.

$560 for 8lt. is quite cheap, is that the price when u bought in Japan? becauses there is just no way to get 8Lt with $560 in Oz at all, I would buy all 8lt off you for $800~ :P

The car manaul show 8lt for CVT flush, but guess I would need to contact Nissan to confirm it.

Link to comment
Share on other sites

i would like to know the same as well.

How often you need to change the fluid? Every 36 months or 80,000km?

Can't Nissan dealer change it for us? since the 350z comes with the same auto transmission on the 5 speed.

cheers

Link to comment
Share on other sites

i would like to know the same as well.

How often you need to change the fluid? Every 36 months or 80,000km?

Can't Nissan dealer change it for us? since the 350z comes with the same auto transmission on the 5 speed.

cheers

I hope you're not suggesting that the 350z has the same auto transmission, as it is completely different.

I'll set the record straight as there seems to be a lot of people unsure of the details to do with the CVT.

I did the research and came up with this:

*The Nissan Extroid CVT is found in the 350GT-8 aswell as the Cedric and Gloria, but those last two had an earlier 6 speed version.

*The transmission is made for Nissan by a company called Jatco Ltd (scroll to the bottom), model designation JR006E.

*The half toroidal 'rollers' contained in that transmission are manufactured by NSK Global.

*The special oil is manufactured for Nissan by a huge company called Idemitsu Kosan.

*Based on the research data from the aforementioned company, the oil starts to lose its integrity at around the 120k mark, however Nissan recommends at or before the 100k mark.

*Some dealers will change the oil for you, others won't, depends on how much of a risk they perceive it to be, I'm sure you'll find someone to do it. Just make sure they accept liability in the event there is an issue.

The oil was developed to solve a specific problem, that is to provide traction between two surfaces under great pressure, (half toroidal rollers) in addition to being able to handle temps around 200 degrees. Strangely enough it also provides lubrication for all the other moving parts, its only when placed under great pressure that the molecules bond, therefore providing a relatively solid tractive surface for the rollers.

And yes, the oil is not cheap, but unfortunately no one makes an alternative.

Edited by GoldV35
Link to comment
Share on other sites

Thank you for the summary as it sums everything up nicely. Given at the time that Toroidal CVT was developed it was a good idea but not sure because of the complexity that more things could go wrong therefore low adoption or is it because the development/cost of fluid to fulfill the needs.

Link to comment
Share on other sites

Thank you for the summary as it sums everything up nicely. Given at the time that Toroidal CVT was developed it was a good idea but not sure because of the complexity that more things could go wrong therefore low adoption or is it because the development/cost of fluid to fulfill the needs.

I think it could be due to a few reasons, cost obviously being a big issue. That would only go down if consumer uptake increased which would in turn lead to further development and improvements to the manufacturing that in turn would lower cost.

Car makers such as Mercedes Benz, BMW and Audi have 7 and 8 speed DSG boxes now, and it won't be too long before this technology filters down to the cheaper segment cars. And when they do, they will essentially render the toroidal CVT redundant, as they are almost as smooth and economical, most importantly though, cheaper. So there is no point developing the toroidal CVT any further IMO, and I think the execs at Nissan recognise this.

In addition, the belt/chain drive CVT's currently in use are making advancements, improving and from what I can see they have the small to medium car segment tightly in their grasp.

Link to comment
Share on other sites

Car makers such as Mercedes Benz, BMW and Audi have 7 and 8 speed DSG boxes now, and it won't be too long before this technology filters down to the cheaper segment cars. And when they do, they will essentially render the toroidal CVT redundant, as they are almost as smooth and economical, most importantly though, cheaper. So there is no point developing the toroidal CVT any further IMO, and I think the execs at Nissan recognise this.

In addition, the belt/chain drive CVT's currently in use are making advancements, improving and from what I can see they have the small to medium car segment tightly in their grasp.

Yes the traditional CVTs are making great leaps and are available in Oz across all segments.. because of their inherent efficientcies. A CVT works much better with a smaller engine due to its ability to keep the engine running at peak torque as much as possible. This is not possible with even the best DSG type transmission. That is why Audi still use CVT in their 2wd A4s but DSG in the A3's and the Quatro A4's. But the big Audis, the A6, A8, Q7 are all manily conventional slushmatic autos, same for Merc and BMW.

Nissan and Audi are the only people to fit CVT to larger 6 cylinder vehicles and I think that these manily FWD vehicles are not producing more torque than these transmissions can take. However, the Toroidal CVT used in RWD applications had to be capable of handling more torque and hence has this special oil and other things. FWD cars just tend to wheelspin away exces torque, but with RWD, it just loads up the transmission, until it breaks traction, or the gearbox..

However, the DSG is getting there. As a manual replacement, it works well, and with each upgrade gets closer to acceptable auto preformance for the masses..

So drive your GT-8 and enjoy it!! It is a fantastic transmission linked to a fantastic engine... It was just too good and advanced to survive out side the most exact service requirements... And as we have found, not all Japanese owners are as diligent with their servicing as we would have hoped...

Link to comment
Share on other sites

So drive your GT-8 and enjoy it!! It is a fantastic transmission linked to a fantastic engine... It was just too good and advanced to survive out side the most exact service requirements... And as we have found, not all Japanese owners are as diligent with their servicing as we would have hoped...

You took the words rite outta my mouth~~~~~

As i keep saying, if someone was to swap me a 5 spd auto (apples with apples), I would keep my CVT anyday of the week....You guys who don't own one are missing out....Yes, so what, they are expensive to maintain when it comes to the fluids, but so is your girlfriend or wife....

I rest my case...

Link to comment
Share on other sites

hold up one sec im slightly confused... ill try to make this easy to understand and hope someone can give me an answer.

1.this post is regarding to a gt8cvt right?

2.pw350gt is refering to a 5speed cvt auto? isnt this the same as the 350z? so nissan can do it?

3.i would understand that nissan cannot change it for the gt8cvt but can for the coupe cvt5speed? am i right or missing a point?

hope im not confusing anyone.

Link to comment
Share on other sites

hold up one sec im slightly confused... ill try to make this easy to understand and hope someone can give me an answer.

1.this post is regarding to a gt8cvt right?

2.pw350gt is refering to a 5speed cvt auto? isnt this the same as the 350z? so nissan can do it?

3.i would understand that nissan cannot change it for the gt8cvt but can for the coupe cvt5speed? am i right or missing a point?

hope im not confusing anyone.

I can't believe people are still asking these questions when I laid it all out on a silver platter for them in post #11, I feel like I'm taking crazy pills.

Link to comment
Share on other sites

Maybe this will help all those new to V35s....

V35s came in:

1. 6 speed manual

2. 5 speed tiptronic auto

3. 8 speed CVT tiptronic auto (only made for V35 sedans, Series 1)

How do you know if you have a CVT? look at the shift lever surround, it will say CVT....

If you don't have a CVT, your 5 speed auto will take on the generic auto transmission oil (readily available). If you have the CVT, it needs a not-so-readily-available auto transmission oil....

My preference is for a CVT gearbox as in normal bumper-to-bumper driving and highway cruising, the CVT changes gears smoothly at under 2,000 rpms in DRIVE gear = fuel economy. But when u slap it into tiptronic mode, it changes it characteristics and can rev to almost redline....just make sure that when u do use the tiptronic, to let your foot off the accelerator, change gear, then step on the accelerator...This 'TIP' is for those who have come from a manual transmission setup....You wouldn't change gears without clutching; would u? So please, despite the way how many drive tiptronics (like Top Gear), if u wanna prolong your auto transmission, ease off the gas b4 u change gears...Obviously this doesnt apply when u r in the DRIVE gear...

My 2 cents worth anyway....

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...