Jump to content
SAU Community

Recommended Posts

Changing pumps in my Stagea. Does anyone know exactly what this "valve" purpose is? It looks to be 'incomplete' or damaged?

Pic:

post-48775-1250072704_thumb.jpg

Okay, the pic is a bit blurry, but its the best I can do this time of night.

Its right off the pump. I'm now fitting a Bosch pump and need to know if I can just get rid of this "valve"?

Anyone? :ninja:

Link to comment
https://www.sau.com.au/forums/topic/283115-fuel-pump-upgrade-question/
Share on other sites

sorry not sure....but if it helps when I fitted my walbro I just left that valve out with no problems. It might be an anti-drain back valve to hold pressure when ignition is off for faster priming....but thats just a guess

Worked out its a relief valve in case of blockage in the line. It does appear mine is faulty ... been having problems getting the FPR set right. Now I know why. I'll remove it and finish fitting my 040 tomorrow.

:ninja:

got the bosch 019 (exact same specs as 040)

fitted it a couple weeks back,will be pulling it out again soon to re-check wiring to make sure the rubber boot things are sweet and replace a line we hagged fitting it

their noisy little farkers too ruby

got a decent stereo in your stag?you'll need it!

yes its a pressure relief valve. if your fuel line becomes blocked or fuel cant leave the tank for any reason, it opens and released pressure so you dont destroy your fuel pump or blow up fuel lines.

its best to leave it there. if its faulty, replace it. simple as that!

their noisy little farkers too ruby

got a decent stereo in your stag?you'll need it!

JVC KW-AVX820 DVD head unit

Option Audio OA65R 6.5" kevlar cone pro series speakers and tweeters up front

Kenwood KAC-M845 2ch amp for the front speakers

Option Audio OA60C 6.0" kevlar cone pro series speakers at the rear

JVC 12" subwoofer and box

JVC KS-ZX3002 mono amp for sub

... and I'm usually jammin' Linkin Park and Rammstein for tunes.

Is that enough? :)

its best to leave it there. if its faulty, replace it. simple as that!

I've built many project cars (and project bikes) with upgraded fuel systems and I've never seen a valve like this before. Never had a problem with any "blockages" in the past.

If there is a blockage, the car won't run ... simple. Plus the fact the 040 is a noisy pump. Only an idiot would keep wanting to crank the car over, ignoring the noise of the straining fuel pump.

there ARE a lot of stupid people out there. ok maybe stupid is too harsh. lets say people that just dont know what that sound is.

i know if my wife was driving and she heard something different, she wouldnt really care... just as an example!

not everyone is attuned to their car like a lot of us are!

Oh yeah, Ruby, if you can work out how to get a constant 14.4v feed to your fuel pump (which is what a lot of workshops do), then do it. Duncan might be able to explain this, as he was there and involved when his was being replaced.

Can do.... the rewire was very helpful in the 32, not sure if it is such a problem in stag yet since they are new. But basically fuse and run a wire direct from battery to a 30A relay near the pump. Use the current power feed to the pump as the relay signal. Run out from the relay direct to the pump (keep large diameter as long as you can). Directly earth the other side of the pump to chassis.

In fact the detailed thread is here:http://www.skylinesaustralia.com/forums/Fuel-Pump-Direct-Feed-Rew-t91993.html&st=200#entry4605573

JVC KW-AVX820 DVD head unit

Option Audio OA65R 6.5" kevlar cone pro series speakers and tweeters up front

Kenwood KAC-M845 2ch amp for the front speakers

Option Audio OA60C 6.0" kevlar cone pro series speakers at the rear

JVC 12" subwoofer and box

JVC KS-ZX3002 mono amp for sub

... and I'm usually jammin' Linkin Park and Rammstein for tunes.

Is that enough? :D

i think that should do it roo,i often drive home from work without the stereo on,just listening to the noise pump,loud exhaust,squeeky subframe pineapples and the strange rattle in my vents below the windscreen

i love my car

i think that should do it roo,i often drive home from work without the stereo on,just listening to the noise pump,loud exhaust,squeeky subframe pineapples and the strange rattle in my vents below the windscreen

i love my car

hahaha

mine the damn mearcat pod rattles against the windscreen, drives me nuts.

I took the top of my tank, looked at where the pump was and put it all back together to do another day, i know i should do it, but CBF.

I replaced my stocker with a Walbro. There was a suggestion that it wasn't performing and someone lent me a GTR pump to try but it was not very different (was better though) so I swapped it back. I'm quite good at changing pumps now! (Tip - make sure you run down your tank to almost empty before changing pumps!)

If you have not already good idea to get full battery voltage to pump (tutorial in "how to" dept in Skyline section).

(Tip - make sure you run down your tank to almost empty before changing pumps!)

mine turned up in the post abit earlier than i expected,so id filled the tank full the night before,did it on a full tank.there nothing quite

like being elbow deep in fuel trying to unclip the farkin cradle

If you have not already good idea to get full battery voltage to pump (tutorial in "how to" dept in Skyline section).

will be doing this very shortly :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...