Jump to content
SAU Community

Recommended Posts

ive got a r33 s2 and want to put my z32 afm and to have the car run , I know you have to go to settings then air flow but when I go there it says r33 normal and when I press next it goes to a list of voltages what am i supoosed to do the set it up run a z32 i havnt been able find my answer searching or on pauls faq

Link to comment
https://www.sau.com.au/forums/topic/283455-how-to-set-pfc-to-run-z32-afm/
Share on other sites

its in the FAQ - select VG30 AFM From the menu - the VG30 is the engine which uses the Z32 AFM

this will load the base ramp values for the Z32 - it still needs a full tune when you change AFM

if your car is relatively stock it will be fine if u drive it steady. I put my PFC in for a bit one day for a play and just ran around off boost at lower revs and it displayed next to no knock. The base map is pretty fuely i think but as long as u drive it to your tuner (if hes not a great distance away) really lightly it should be fine. If you have any doubts just run the stock ecu till u get there or nearby and change it then

It wont be driveable.

Yes it will!

I put a Z32 AFM in my R33 GTSt about four weeks ago, changed the PFC over to VG30 AFM, and have been driving it daily on the base PFC maps. Got a wideband Oxygen sensor and it holds around 12 when accelerating hardish, and around 14 when cruising...cruise is a bit rich for my liking...knock is always low though...

Other related mods are FMIC, 3" turbo back exhaust, pod filter, 10psi boost etc...

Going to put bigger injectors in soon, and then off for a tune... :D

Peter

Willing to put his motor on it?

It has been tuned for the current AFM, so it wont be running hell rich like a stock map which basically couldnt kill a motor if you tried...

Most likely the tune will be close to perfect, not rich and so on. Adding in a larger AFM could spell disaster.

I think its a silly risk when it is a 15min job to change at best, i would drive to the tuner, change the AFM when you get there, rest assured you will not mince anything.

Willing to put his motor on it?

It has been tuned for the current AFM, so it wont be running hell rich like a stock map which basically couldnt kill a motor if you tried...

Most likely the tune will be close to perfect, not rich and so on. Adding in a larger AFM could spell disaster.

I think its a silly risk when it is a 15min job to change at best, i would drive to the tuner, change the AFM when you get there, rest assured you will not mince anything.

Fair enough....my oversight...I agree....

Quick reply I must say...your like a hawk! :D

Pete

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...