Jump to content
SAU Community

Automatic Shift Kit For Skyline

scottmiller

By scottmiller,
in Western Australia

 Share

Recommended Posts

  • 1 month later...
GTTR34 4 door Enthusiast

GTTR34 4 door

Posted
Posted
hey i was after an automatic shift kit for a skyline r34 gtt, its tiptronic. does any one no where i can get one in perth.

cheers

Apparently the cheapest place around is MV automatics in SA. I know you asked in WA but i need one too and thats the best place apparently. Sorry i couldn't be of much help

autoworx Rising Star

autoworx

Posted
Posted

the ones we have done/seen done are still pretty slow

the r34 retards timing severly on gear changes also so you need to re-map the ecu to get rid of that also

I would highly recommend you put that money elsewhere or into a manual conversion

Mayuri Krab Grand Master

Mayuri Krab

Posted
Posted

I like to know this as well, I got a R33 GTST auto.

the ones we have done/seen done are still pretty slow

the r34 retards timing severly on gear changes also so you need to re-map the ecu to get rid of that also

So you guys do shift kits for auto Skylines? Can I get a rough price for the kit & install?

scottmiller Enthusiast

scottmiller

Posted
  • Author
Posted

i found a place that do quick shift kits for skylines, its in malaga. i got one installed in my car the other day it changes gears pretty much instant, i can cherp every gear which is heaps of fun.

the guy you need to talk to is paul - 0439159085

tell him scott sent ya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Red Sky II
      Looking for autoelectrician in Perth who can do the OEM to double din stereo upgrade.

      By Red Sky II · Posted

      Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...