BOZ22N Posted August 15, 2009 Share Posted August 15, 2009 Hi, As some of you know i tried and failed to sell my much loved GTSt, so instead of giving it away i decided to cancel the rego and build it into a relatively cheap fun track car. This will by no means be a car that i am expecting to compete against the big boys with as it would just end in tears. So it will be mainly aimed at events like Super Lap, SSCC, the MRA series and just kick about track days with friends. As the car stands it was my daily driver for 3 years and served its purpose well. Soon i took it to its first track day and with the help of Neil i became hooked. and with a little tape wola That was in 07, since then i have just been doing some SAU days, a Bathurst speed weekend and the 08 superlap and i kept it road regoed till now. So far the car has had a little work done to it as below. Engine: Std internals HKS 256 and 264 cams with adjustable HKS cam gear on exh side (VCT remains) Spitfire coil packs Plazmaman inlet plenum Sard 550cc injectors Walbro in tank fuel pump Std GTR front mt intercooler Nismo adj FPR GT3071R turbo with 700177-5023 cartridge number, it is the un-cropped Garret GT30 turbine housing with no internal gate. TiAl 38mm external gate 3" turbo back exh with the W/G line plumbed in just before the cat 15 row oil cooler with filter relocation kit Z32 afm HKS super suction air filter kit AVCR boost controller Apexi power FC Drivetrain, handling and brakes 5 paddle B/Button clutch Re shimmed and re sealed std diff Hicas removal bar GTR strut brace at the front GTR lower strut brace at the rear Bilstien shocks and Whiteline springs ( Sydney kids GB ones ) Selbys adjustable solid swaybars front and rear Whiteline camber kit front and rear Whiteline diff alignment kit Whiteline adj caster bushes 17 super advan rims with Falken RT615 street legal semi slicks 235's on the front and 255's on the rear Brembo R33 GTR brakes front and rear with braided lines Std GTR rotors on the rear and RDA slotted rotors on the front Hawk DC60's pads on the front and HT10's on the rear ( Very good pads, best i have ever used) Larger master cylinder with bias adjuster So for this build up the engine will getting removed mainly just be to get the A/C and heater core and lines removed. Tidy up and inspect it (not stripping it) then refit the engine with a new set of Nismo engine mts, alloy radiator and a alt under drive pulley set. The gearbox is only getting a clutch bypass line, Nismo short shifter, a knob and a Nismo mount. I have just built a diff for it. I got it out of a S14 housing i think??? (it was just lying around at a mates) and used my std ratios and just re shimmed the center in my housing. I don't know the brand of the diff but it is a 2 way of some breed ?? we will see how it goes. I also fitted a GTR rear cover to get an extra liter of oil and some little cooling fins to try and help the diff survive a little longer and some new whiteline front diff mt bushes. The brakes and suspension are staying the same just with the addition of front and rear adjustable cambers arms, i have not decided on a brand to use yet so anyone with some experience please post up your comments or i was just looking at the JJR ones??? The interior is where all the action will be happening, it is getting the sunroof removed and welded up and a full roll cage welded into it from Bonds. The interior will cop a few more little additions in the way of some saber gauges and a new steering wheel and D1 quick release. The wheels and body work will be staying the same at this stage unless i can find a cheap vented bonnet?. I got home yesterday from work at 10AM after just finishing my fourth night shift and decided it would be a good time to start stripping the car out, i was drunk with fatigue . So with the help of a mate two pies and a double espresso dare. I got the gearbox, tail shaft, radiator and engine out. As you can see i had broken the LH engine mount, from what i have seen this is common in R33's. Today i was planning on getting the engine in the stand and tidying up my mess and starting to strip the interior out. But i have spent all morning trying to work out how to attach pics in this post ( Gee i hope they work). Anyways thanks for reading and i will try and up date along the way with pics if i can get any. Enjoy. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/ Share on other sites More sharing options...
Gts-t Posted August 15, 2009 Share Posted August 15, 2009 Looking good mate! +1 for another gtst project Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4769090 Share on other sites More sharing options...
evil_weevil Posted August 15, 2009 Share Posted August 15, 2009 Good to see the threads finally up Ryan!!!! This is going to be a freaking sweet build up, and cant wait to get chopped by it @ the track! Oh theres a pic of my old r33 @ bathurst with ya! haha I kinda wish I had the skill and knowledge to do this with my old R33, would have been good, team GTS25t NUGGET!!!!! but I just dont have the time, place, nor skills! haha Once she's back together Id look at getting some decent semi slicks too! Im gonna have to come up one weekend, get on the cans and help! Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4769515 Share on other sites More sharing options...
evil_weevil Posted August 15, 2009 Share Posted August 15, 2009 p.s. I like your garage! Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4769517 Share on other sites More sharing options...
BOZ22N Posted August 15, 2009 Author Share Posted August 15, 2009 Once she's back together Id look at getting some decent semi slicks too! Im gonna have to come up one weekend, get on the cans and help! I hope to get a new set of rubber next year after i have had some time back in it. Sounds like a plan bud. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4769672 Share on other sites More sharing options...
DCIEVE Posted August 15, 2009 Share Posted August 15, 2009 Is the soft tow hook an off the shelf item? Keep the updates coming! Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4769961 Share on other sites More sharing options...
BOZ22N Posted August 16, 2009 Author Share Posted August 16, 2009 Is the soft tow hook an off the shelf item?Keep the updates coming! Nar home made bud. It is part of a large tie down strap folded over then stitched together with heavy duty thread at a sailing shop. Then i punched two stainless steel eyelets in it, then wola you have a soft tow strap. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4770096 Share on other sites More sharing options...
adis Posted August 16, 2009 Share Posted August 16, 2009 Shame your taking it off the road, very nice looking 33. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4770307 Share on other sites More sharing options...
BOZ22N Posted August 16, 2009 Author Share Posted August 16, 2009 Well did not get much time on it today, but i got the engine in the stand and all tidy. I will have to get some new buttons on the clutch and the flywheel and pressure plate tided up also. The dampener also looks to have a few small cracks appearing in the rubber so i might have to source one of them as well, i will remove it and have a look laters. The misses helped refit the bonnet and the car is back on its own feet. I got the seats removed and all the rear trimmings off and the sunroof out. All that is left to do is finish off the dash and sort out the A/C, heater lines and the harnesses. Then remove the sound deadener and give it a clean up before it goes away to get the sunroof welded up and the cage fitted. Just a few shots of the interior too peak at. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4770858 Share on other sites More sharing options...
zebra Posted August 17, 2009 Share Posted August 17, 2009 Yay another 33 gtst build...what are you doing cage wise? I really have to start getting mine sorted out soon and keen to see what you do with yours. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4771622 Share on other sites More sharing options...
Munkyb0y Posted August 17, 2009 Share Posted August 17, 2009 what front bar is that? Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4771643 Share on other sites More sharing options...
Risking Posted August 17, 2009 Share Posted August 17, 2009 his cage is sorted Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4772589 Share on other sites More sharing options...
BOZ22N Posted August 17, 2009 Author Share Posted August 17, 2009 Yay another 33 gtst build...what are you doing cage wise? I really have to start getting mine sorted out soon and keen to see what you do with yours. I am getting a weld in Bonds kit with extra bits. It will hopefully be finished for the SAU South tack day but i don't know? it will be close. what front bar is that? It is a Jet Speed front bar i modified, it was a T type i think? his cage is sorted Very excited Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4772923 Share on other sites More sharing options...
jazzy_j Posted August 17, 2009 Share Posted August 17, 2009 his cage is sorted Our to do list seems to be growing. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4772941 Share on other sites More sharing options...
Duncan Posted August 17, 2009 Share Posted August 17, 2009 great to see ryan, can't wait to see this on a track again! Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4772980 Share on other sites More sharing options...
BOZ22N Posted August 17, 2009 Author Share Posted August 17, 2009 great to see ryan, can't wait to see this on a track again! Thanks mate either can I. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4772998 Share on other sites More sharing options...
Risking Posted August 17, 2009 Share Posted August 17, 2009 Our to do list seems to be growing. It does doesnt it. Bugger. How did the whole sunroof enclosing?? Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4773027 Share on other sites More sharing options...
BOZ22N Posted August 18, 2009 Author Share Posted August 18, 2009 It goes in to get done next week Brad. It looks like it should not be as bad as first thought. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4774932 Share on other sites More sharing options...
Lopez Posted August 19, 2009 Share Posted August 19, 2009 nice Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4776401 Share on other sites More sharing options...
BOZ22N Posted August 22, 2009 Author Share Posted August 22, 2009 Ok i am hoping that over they next two days i might have the car ready to be sent to the smash repairs, fingers crossed. I just have a few questions to ask others with purpose built track cars already. Did you keep the blower fan for some cooling/air circulation in the cabin? I am think of getting rid of it all together. Did you remove the heater core also? Again i am wanting to remove it as well. And is it worth welding up the holes in the firewall or just cutting some cover plates and fixing them to the fire wall so they can be removed at a later date if they needed to be? Cheers. Link to comment https://www.sau.com.au/forums/topic/283461-my-r33-gtst-project/#findComment-4782926 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now