Jump to content
SAU Community

Recommended Posts

Hamish does have a valid point although something that really stumps me is why isn't an alarm system the first thing you get when you buy your pride an joy? ~$400 protection for your $12,000+ investment sounds pretty reasonable to me

It was on the stagea and 32 :)

Hamish does have a valid point although something that really stumps me is why isn't an alarm system the first thing you get when you buy your pride an joy? ~$400 protection for your $12,000+ investment sounds pretty reasonable to me

club locks are/can be more effective and cheeper, if a thief is keen enough the noise from the alarm won't be a deterant. if you have a aftermarket steering wheel tho. don't bother 6 allen key bolts and swapped wheel is quicker then by-passing a alarm.

I put a imob and stuff in 1 of my cars and they still came back and stole it. (it was broken into a week before)

So how did the key's get locked in the car while it was on in the first place?

no idea ?

i am sure the car locked itself when i closed the door ?

the immobilser/keyless entry was on the keys

viper alarm?

they are american and have anti car jacking features such as the doors locking while you are driving...

BUT

as i said, they are american and hence it only works ever now and then, so you often dont notice that its there as you just think its the factory nissan one

quick relese steering wheel, lets see the bugger drive off with no steering wheel! and yeh skyines are the worst car eva designed takes about 11sec flat to unlock one and about 15sec to hotwire one with a turbo timer.

VLT has got to be easier :) my old VL was a joke to get into, all you needed was cutlery LOL

I think Hamish was more concerned about the instruction to pull the rubber back than the actual coat hanger to window switch part, but whatever.

quick relese steering wheel, lets see the bugger drive off with no steering wheel! and yeh skyines are the worst car eva designed takes about 11sec flat to unlock one and about 15sec to hotwire one with a turbo timer.

How do you getting around steering column lock without totally removing the barrel?

need some help

i locked my key in the car ( car is still running ! )

running the car dry cant be good for it ?

anyone know a locksmith in melbourne ?

how much is going to cost me to open it ?

Nick, you idiot, this is too funny.... ba ha ha ha

Thats ridiculous I keep a Stanley knife in the back of my cars tool box....probably should go take it out

I think its only if it is in reach when you are inside the cabin of the car. If its in the boot in your tool box none the less its alright.

VLT has got to be easier :D my old VL was a joke to get into, all you needed was cutlery LOL

I think Hamish was more concerned about the instruction to pull the rubber back than the actual coat hanger to window switch part, but whatever.

A mate of mine locked his VL keys inside his car. We went and got another one of my mated VL keys and it opened the door. It even started the engine.

How do you getting around steering column lock without totally removing the barrel?

just rip of the plastic cover for the colum and hit the barrel down the shaft done. dont hit it into the shaft stright down it will slide down the the steering colum and wont beable to lock into place but if you engage the steering lock before you do that it makes it a messy job.

you can get gps alarms now, they have a gps device in them and a sim card that texts you the location when you msg it.

best thing to do is get a guard dog that sleeps next to it and have good insurance.

do you think its wise to put information on a public forum on how to get around the steering wheel lock?

Thats pretty bad luck OP, i've seen the same thing happen on a VS commodore before, and it was eventually broken into with a piece of wire. try lockign the doors with the keys in your hand at all times maybe?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For me at least the reason why it bothers me is because it's indicative of a deeper problem. And that will nag at me forever. Especially because I have tailpipe emissions testing + evap leak testing every 2 years.
    • WELP. I went to the track, and I suppose it went okay because any time you can drive home is okay. You may notice the car is not on the circuit in this picture. It was about 35C day out in Benalla which means the track was approximately the surface of the sun, probably. Good things, car did not overheat but it _was_ warmer than when I had done track days in similar heat before, I think, I'm not sure - I can't quite remember. Coolant got to ~105 via the ECU after 20-30 minutes of belting it in said heat. Oil got up to 145C in one instance which is pretty crazy due to oil cooler. Pressures were fine. I seem to remember this not getting quite so high before the vents. More HMMMM'ing to be done. On the subject of HMMM'ing, can anyone identify the sounds in the video below, you will know which ones I mean: https://www.youtube.com/watch?v=uj3BkI2cbTc I included some 'normal' sound as a reference for the first minute or so. The microphone in this instance was where the license plate is. It stopped working later in the day which is why my "best example of a lap video (not produced)" had internal audio - Isn't hearable from inside the car. I don't mean the chirping of the un-bedded/badly bedded track brakes which you can only hear while braking... Thoughts, brains trust?
    • blame old mate Hawkins for that one  I remember way back in the day the japanese didn't want them either... they always assumed a race shell would be thrashed. We found a few when looking for an R34 GTR for the Whites to drive in Targa Tas back in 2002.
    • I know it's probably not going to cause any major engine issues. I just had a more generic concern that it's technically not running right (I guess this means the rpm is not sitting where it technically should be) Though the other thing is, it's that my steering wheel is shaking at 1,100 rpm at idle until it gets warm (seemed to happen after I tightened my alternator belt, will be testing the alternator soon).
    • I mean, what's the concern here? Higher fuel consumption? FWIW my idle sits at around 800rpm or so as well. And yes, it runs fine, idles fine and there are no issues as far as I can tell. I don't quite see the problem.
×
×
  • Create New...