Jump to content
SAU Community

Aug Deca - Wrap Up

R31Nismoid

By R31Nismoid,
in Victoria

 Share

Recommended Posts

KezR33 Veteran

KezR33

Posted
Posted
If you can tell the difference with a relatively stock car when you add a rear strut brace then you're probably going as fast as possible already. Don't waste your money. Keep your eye out for some used semis, that's what I do and you get them for a fraction of the cost. People will tell you that they're nowhere near as good and blah blah but they're still better than most streets and will last much longer than streets when being driven in anger. Save your money for the coilovers (DO NOT buy second hand - I've seen that many stuffed used ones), get some used semi's and you will be paddocks quicker.

PS the driver training day will always be money well spent. You'll get faster and safer. I think we all could use a lesson.

The rear strut was recommended (no front) to help with the under steer as the Supra is very front heavy. Just going off other people's advice.

  • Replies 358
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

scotty014 Veteran

scotty014

Posted
Posted
The rear strut was recommended (no front) to help with the under steer as the Supra is very front heavy. Just going off other people's advice.

id be looking at some swaybars. im going to get the whiteline ones. it will make your car sit flatter around the corners.

Birds Grand Master

Birds

Posted
Posted
id be looking at some swaybars. im going to get the whiteline ones. it will make your car sit flatter around the corners.

Agreed. Rear swaybars do wonders for understeering cars, probably moreso than strut braces.

KezR33, driving tuition is a great spend for getting around quicker. I'd recommend some engine mods, but given you're N/A the smartest mod you can do IMO is a GTE conversion :P

Check out the suspension, but if you don't have the money to spend on coilovers I recommend replacing all your bushes for polyurethane and installing a big f*** off rear swaybar. Will give you some nice firm handling without even touching the springs/shocks, plus some oversteer to play around with. A set of grippy tyres is always good but they don't have to be expensive. You're going to fry them anyway so if you're on a budget perhaps look at some of the dry only street tyres. I remember a while ago a car magazine did a tyre test and the $100 Federal tyre performed right up there with the $300 tyres in the slalom/braking (it was f***ing pants in the wet though). Perhaps slap these on some shitty spare wheels and save them for DECA type events?

NUTWGN Proficient

NUTWGN

Posted
Posted (edited)

*steals some of Bec and Juz's popcorn and settles in*

I cant believe I got this far, all I wanted was some photos and the results :P

Some awesome photos there, Thanks to all for uploading!

Edited by NUTWGN
AGE Veteran

AGE

Posted
Posted
Let us introduce you to Troy.... He is KING.

Nothing compares. haha!

here here :P
TROY IS GOD!!

The question is not what did troy do? But what hasn't he done?

I think Troy should win Deca even though he is in India.

It is the least we could do! :huh:

In Honour of the Gate!!

TOTALLY AGREE

brisaward.jpg

dave1200 Collaborator

dave1200

Posted
Posted
The rear strut was recommended (no front) to help with the under steer as the Supra is very front heavy. Just going off other people's advice.

A strut brace is not really a suspension component. If you are having understeer issues a strut brace is not going to fix it. Sure they have their place and they make suspension more tunable when you are trying to find that extra bees dick of perfomance but you will not notice the difference on a car with stock suspension.

Like someone said, you could get a thicker rear swaybar but I would be looking towards your front end and improving grip. Maybe some adjustable upper arms for a little camber may be enough and that's cheap.

_Ryan_ Grand Master

_Ryan_

Posted
Posted
ill be running semis.....mwwwaaaahahhaha

Did you see Roman's tyres? flatspotted snow tyres on the front, and half decent rubber on the rear :S

My aim is too have a TPS and brake pads by then... pads are yet to be ordered, TPS, well the wrong one was sent weeks ago, and the replacement was due down last week... So maybe by november, hopefully this year.(This is not my mechanics fault, solely the parts supplier who won't refund us, only replace)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By GTSBoy · Posted

      Where do the wires go?
    • elohim_imanu
      R33 Rear Skyline Light Up Garnish

      By elohim_imanu · Posted

      I also built one, for a bit of a laugh. Pretty happy with it. Basically, obtained a clear garnish, painted it sanded back the paint off the letters, clear coated it. Inserted a 3cm EL strip through a slot I created in one end and sealed it up.
    • perry_r33
      Apexi SAFC AFC 1st Gen Knob Style With Box & Apexi SAFC 2

      By perry_r33 · Posted

      Apexi SAFC - AFC 1st Generation Rare Old School JDM As you can see it all lights up in the photos and is in 100% working condition. Has been kept in storage and boxed for years there won’t be to many like this if any! Especially with all original packaging and manual. price:$650   APEXi SAFC 2  In Complete Working Condition Refer To Photos and view the video provided.  Price:$500   Located Melbourne - Australia Wide Postage Available At Buyers Expense  IMG_6981.mov
    • 84eighty
      So i brought a boat...

      By 84eighty · Posted

      wow so i just logged back in after buying the 33 and joining SAU, And I've got all a whole bunch of you wanting to know more, well unfortunately it still doesn't run i was hoping it was seized from a snapped timing belt as i turned it over by hand and it was fine and then it did a few revolutions and jammed solid when i was running it with the key, so the timing belt is mint, I've also found a lot of the parts I'm removing have already got bolts undone or not quiet tight enough to be unsuspicious. so the plan is to find a running RB30 block and chuck my head on it.  I have a habit of buying stuff I don't need or require so for my none running engine i have a forward facing plenum , Apexi power fc, 40mm Turbosmart wastegate, And for the car its self coilovers ,low seat rails and BRZ seats (black seats with red stitching i already had these and they are ADR Approved and allow rear passengers access)  
    • kevboost7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By kevboost7 · Posted

      I took apart the dash and found this strange 2 pin connector. it dosen't seem like its factory or oem, any clue on why someone would add it and where it might have been connected too?    
×
×
  • Create New...