Jump to content
SAU Community

Small Battery Terminals To 'normal' Size...

xanavinismo

By xanavinismo,
in Car Audio & Electrical

 Share

Recommended Posts

xanavinismo Rising Star

xanavinismo

Posted
Posted

Hi all,

What part do I get to change my factory Japanese style small battery terminals to 'normal' larger ones? Is it something like 'Battery Terminal sleeves'? I have attached a picture of one example...

Cheers,

Glen

post-38738-1250488641_thumb.png

Carbon 34 Grand Master

Carbon 34

Posted
Posted
Hi all,

What part do I get to change my factory Japanese style small battery terminals to 'normal' larger ones? Is it something like 'Battery Terminal sleeves'? I have attached a picture of one example...

Cheers,

Glen

I bought some aftermarket car audio terminals, with mutiple inputs , lopped off the factory crap and popped the wires into my new ones. I think mine are US Audio ? look nice in satin silver with clear plastic molded covers I can pop up some photos tomorrow if you want to see them ? (sorry bit busy now)

Carbon 34 Grand Master

Carbon 34

Posted
Posted
just go autobahn or jb and they will have them

sorry mate, got really busy with friend in ICU at the hospital,, tomorrow the photos will be posted up.

I think you need to see how to do the factory wires into the after market terminal, cause if its wrong it will fall out and leave you stranded

-Stokesy- Collaborator

-Stokesy-

Posted
Posted
Cheers Stokesy.

Hey mate, sorry for the delay i completely forgot about it.

Here is a pic of my terminals i can't really get a better pic as i've reinstalled my amp rack. As you can see they're RF dual 0Ga + Dual 8Ga

post-36287-1251268451_thumb.jpg

coaster Proficient

coaster

Posted
Posted

Yes stokesy is onto it. You can get all types of terminals. You can get all different sorts from any battery store for about $3 bucks each. Most places will change them over for you.

I think your better off keeping the optima upright too by the way. You can use them that way but they seam to last longer upright.

-Stokesy- Collaborator

-Stokesy-

Posted
Posted
Yes stokesy is onto it. You can get all types of terminals. You can get all different sorts from any battery store for about $3 bucks each. Most places will change them over for you.

I think your better off keeping the optima upright too by the way. You can use them that way but they seam to last longer upright.

They last longer upright, really?

I've never heard that but then again I've ever really looked into in... It just makes it so much easier to access the terminals this way, I might look into this as i really don't want to kill a $400 battery

xanavinismo Rising Star

xanavinismo

Posted
  • Author
Posted

What do you guys think about Battery Isolator switches? They also have the added bonus of killing the power to the battery at the turn of a knob (my cars a weekend warrior after all...)

Link: http://www.accessoriesonline.com.au/shop/p...t=21&page=1

post-38738-1251305453_thumb.jpg

coaster Proficient

coaster

Posted
Posted

We use to sell them where i worked at battery world. They encouraged us to ensure they were always upright unless you really have to install them sideways. Never upside down though. They dont allow that.

Im not a huge fan of isolator's. There are some fully automatic maintinance chargers that are designed to keep your battery fully charged when your not using your car. We use to put them in bikes and race cars ect.

xanavinismo Rising Star

xanavinismo

Posted
  • Author
Posted
Im not a huge fan of isolator's. There are some fully automatic maintinance chargers that are designed to keep your battery fully charged when your not using your car. We use to put them in bikes and race cars ect.

From your experience what are the cons of using isolator's?

Carbon 34 Grand Master

Carbon 34

Posted
Posted
From your experience what are the cons of using isolator's?

those isolators suck dont use them, keep your battery charged up with a trickle charger or solar one

to keep your alarm powered up to protect the car in the shed.

(FYI ....if your high power battery dies you need a serious charger the cheapo ones wont fix it up. )

odessy/optima batteries can be mounted upside down or any which way. there certified for acrobatics use in aircraft hence upside down is fine ????

but the plates are stronger mounted normal side up. battery acid is sealed inside and is a gel and wont spill ?

if I get bored in the next few days I have a old odessy to break open if anyone wants to see inside it before it goes to recycling ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Low oil pressure after WOT

      By Duncan · Posted

      Yeah so N1 and any other larger than factory pump are pretty famous for pumping the sump dry...obviously we don't often get to spend 20 or 30 seconds at high rpm/full noise on the road so I'd still be suspicious that is what is happening here.
    • MBS206
      Low oil pressure after WOT

      By MBS206 · Posted

      You are also getting pressure dips on gear shifts. They're just not dipping as far, but they're dipping quite below the amount of oil pressure you should be seeing, for how much RPM drops.   It quite little could be the oil pressure relief valve is starting to stick open a little/is slow to close.
    • MBS206
      Low oil pressure after WOT

      By MBS206 · Posted

      Can you log battery voltage, and TPS, and put all four of those into a single image (even as split graphs)?   The oil pressure drops aren't following RPM as such. I'm intrigued if you may have a ground loop between different sensors. With the engine not running, log your sensors and for example cycle the throttle pedal. See if any sensor values flutter or move about. This won't be a perfect test either as the ECU won't be cycling all of its actuators like it would be while running. What EMTRON do you have? Do you have a link to the wiring guide for that ECU?
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      What logic functions do you feel are missing from the Haltech that others have? Is there a limit to how much logic you can string together? By limit, I mean it's like only a single level or two levels of Boolean logic. Realistically, AND, OR, and NOT, is really the only logic you need and realistically, you can also do away with another logic gate of the three above . With those three you can build the full functionality of any Boolean logic you want.
    • Dose Pipe Sutututu
      Low oil pressure after WOT

      By Dose Pipe Sutututu · Posted

      Well that rules out the relocation theory, however with no load, you're still getting 1.5bar of oil pressure. Can you present that data in a scatter graph over longer period? Would really highly the anomalies. Wish Haltech could do that.
×
×
  • Create New...