Jump to content
SAU Community

Recommended Posts

sorry guys i'm not going to get through all the pm's before i have to be at work. The 1 pm every 5min thing is killing me making it a very painful process. Pls feel free to call me if thats easier for you.

Cheers,

Rob

Edited by R32 GT-R

Hi,

I called you earlier regarding:

CP pistons/Eagle rods $1400

crank $100

I'll take these, please PM me with details ...

1) Are the CP Pistons 87mm?

2) Crank, Any problems? Spun Bearing?

3) Provide pictures

4) Bank Details

Thanks,

Gordon

hey, ill just grab the sway bars, not the turbo. When you wrote sway BARS, did you mean both the front and rear one? do you mind sending me a pic of them? thanks

Hi,

I called you earlier regarding:

CP pistons/Eagle rods $1400

I'll take these, please PM me with details ...

1) Are the CP Pistons 87mm?

3) Provide pictures

4) Bank Details

Thanks,

Gordon

Update on parts sold so far: Front bar, Gearbox, Block and Cradle, front and rear brake calipers, rear brake discs, hicas lock bar, passenger side air vent, Engine cover set.

What condition are the turbos in?

  • 3 weeks later...

parts sold so far, whole stock bottom end minus sump, ross balancer, jun oil pump, main studs, crank collar, eagle rods, cp pistons, front bar, gearbox, oil pick up, passenger side air vent, hicas lock bar, seats.

turbo's are in fair condition. better than I expected for 137000 km's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the 650rpm idle on the rb25det neo for stock cars only? I've never had my car before and after tuning it to idle at 650rpm when cold. Always idle's cold around 1100rpm, and then drops to about 900-950rpm. I've heard the r33 gtst's idle there. 
    • Series 1 RB25DET 5 speed gearbox, push type, 1st and 2nd gear syncros worn, may need bearings. Comes with quick shift, Tomei gear knob, release fork, bearing carrier, master and slave cylinder. $850. Cusco Super Single clutch,assembly, 225mm, used, comes with a Direct Clutch solid centre 5 puck ceramic clutch plate. $290. RB26 cams used, excellent condition. $280. HDI GT2 intercooler, excellent condition, has 3 inch piping welded to inlet and outlet. $250. All items located in South Eastern Melbourne. Please PM me if interested.
    • Hi all, I’m currently running a str pipe hi low hks exhaust and downpipe. Was wondering if I change out muffler to a titanium one will it change the sound of the exhaust? Plus I have always liked the look of the titanium pipes … anyone have recommendations to one?    side note already have titanium intake pipes. 
    • I looked up my other car that is a R33 GTST series 1.5. Anyone able to confirm what a Aero Form Bumper is?     (1G) 2 Door Coupe; (2GK + 11V) RB25DET; (4B) 2WD HICAS; (7F) 5 Speed Manual; (14G) Super Fine Hard Coat; (15U) Large Rear Spoiler + Aero Form Bumper + Rear Wiper (Aero Selection)
    • Ha ha, all good! I've almost caved in and realised I'm buying one.  I know myself well enough by now that I will start chasing ADHD butterflies half way through building it and not finish it so I'm better off spending the extra money buying one instead of making one just so I can get into straight away.  I would very much enjoy making one as fabrication is probably a strength and definitely a passion but I don't want that to be at the detriment to the car I'm ultimately building it for! There's some pretty good ones around for ~$1100 at the moment so I think I'll just go that way.  At the end I sell it or as mentioned, get another project to make further use of it! Thanks gents.  
×
×
  • Create New...