Rb30det Build Tips

[Coxie]

Hey guys, I'm looking at building up a 3L bottom end for my r33 gtst, i've had a search around and found info on what pistons, rods, bearings etc to use but was just wondering if anyone out there who has plenty of experience building RB engines has any tips/tricks to use during the build (modifying par ts, doing something a different way etc etc). I've had experience with engine tear-down, measuring & re-assembling but any steps you take along the build process of RB specific engines would be much appreciated.

[whiteboy01]

Hey guys, I'm looking at building up a 3L bottom end for my r33 gtst, i've had a search around and found info on what pistons, rods, bearings etc to use but was just wondering if anyone out there who has plenty of experience building RB engines has any tips/tricks to use during the build (modifying par ts, doing something a different way etc etc). I've had experience with engine tear-down, measuring & re-assembling but any steps you take along the build process of RB specific engines would be much appreciated.

I would like to know also - but i'm pretty sure poeple aren't going to tell there trade secrets over the internet, thats what they get paid to do. The best thing you can buy is RB30 workshop manual and all the info is in there. Plenty on the internet to buy for about 80 bucks.

Cheers

[2LV8ETR]

Do a search guys, there's heaps of info.

Also there's a dedicated RB30 thread here: http://www.skylinesaustralia.com/forums/RB...sions-f184.html