R33 Gtr Uprights/ Kuckles On R33 Gts-t

[ijoshi]

hey

i want to know if i can use r33 gtr upright/ knuckles on the rear of my gts-t

i have the suspension to suit gtr upright/ knuckle

can i bolt the gts-t hubs and shafts to the gtr upright/ knuckle?

cheers, josh

[Victory]

We have been playing with this mod in a R32 for some time (months) without success while we have been trying to understand the problem.

With a R32 the GTR drive shaft is different to a GTS-T and GTS and has a oil seal pressed into the upright where the GTS-T and GTS simply run a thing that looks like two disks in the same place as where the oil seal fits into the upright.

We are now heading down the path of having the GTR upright machined to replicate the GTS-T one and hope that solves the issue.

[ijoshi]

damn

i thought it might bolt-on

anyone know if r34 gtt uprights will work?

[cazman]

To answer the question accuratly. Yes.

Each and every art of both the rear ends is different, but most parts are compatible.

The shafts, uprights and hubs are different.

You use GTR uprights, and use your stock gtst hubs and axles, as the axles suit whatever hub you use.

The lower control arm is the same, but you need this little spacer thing, and this may be hard to find, its usually easier to buy a pair of GTR lower control arms.

The alloy hub has a bigger ball joint hole, so you NEED this spacer bit.

Obviously you need GTR coilovers.

Ask nisskid, he did this conversion 4 months ago

[T04GTR]

buy a gtr rear end. and swap the diff yoke over.