Jump to content
SAU Community

Recommended Posts

I'm not totaly happy with my oil presure so I'm thinking an upgrade to the oil pump may be the go and after a bit of searching I have come across NITTO,and N1 and I'm thinking there may be more.

The NITTO was around $1200/1300 and the Skyline GTR NI $580 appart from the $ how big is the difference between these two.

Will the GTR N1 fit the 98 R34 GT-T and will there be a significant improvement over the OE GTT one in there now ?

I'm not modding this car, I only push it around a little bit occasionaly, I'm not $1300 bucks worth unhappy with the current pressure and it wont see the track while I've got it.

Having said all that summer is coming so soon would be the time to do this if I'm going to so any advice on this would be gratefully received.

Oh and while I think about it how hard / many hours in fitting to a 98 R34 GT-t.

Link to comment
https://www.sau.com.au/forums/topic/283924-oil-pumps-aint-oil-pumps-sol/
Share on other sites

I don't know how R34's work, but incorrect oil pressures (32's, 33's) are the result of a dirty pressure switch, I would first clean the switch (near the oil filter). As for fitting a new pump, its a engine out job. Others have reported the Nitto pumps are as good, if not better than the $2000 jap pumps.

If it's not going to the track, or be bouncing off the limiter, there are better ways to spend your money than getting track orientated pumps for a lazy daily driver.

Read this thread: http://www.skylinesaustralia.com/forums/N1...il-t283867.html

I definately wouldn't worry about the oil pump. To replace it you will need to take motor out and pull it apart (it is possible on car but still heaps of labour, balancer off, timing belt off, drop subframe, sump off).

You can get a second hand rb25 for less than the cost of an oil pump....

:P Thanks guys didn't realise how much info was in the Epic fail thread thanks for that , oil pressure sender cleaning will be done.

Just a bit more I came across this:-

NISMO OIL FILTER

FEATURES:

  • 21% LESS PRESSURE LOSS
  • 24% INCREASE IN FILTRATION
  • 10% LESS FLOW RESISTANCE
  • 37% INCREASED LIFE

PRICE: $49.95 EACH

And just wondered if there's any mileage with these claims or is it just manufacturers rhetoric ? reason I asked I noticed an overall slight drop when I changed the oil and filter last time the filter that was in was a Jap no name which I think may have come in with the car.

I'm using 10x40 Nulon quick flow full syn and a Nissan OE filter.

Edited by BASHO

All I can say is FARK THAT! I could be wrong, but with the 'shithouse' Ryco filters, I have no strange variations or delays in oil pressure (that said im going to start using Nissan ones for peace of mind)

IMO if you're going to spend $50 on the filter, add that amount to what you spend on oil and use Motul 300v or something.

I think it's all a load of crap, when theyre $8 each, just change it when you change your oil.. May as well use a genuine Nissan filter, theyre pretty much the same price maybe cheaper than the Ryco equiv.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Does that price include the rack time to straighten the frame and body and replacement of parts and paint, as well as the noise and emmisions testing  The last engineering certificate I had done, albeit about 15 years ago, was around $1000 for a few inspections and the certificate 
    • 😂 thanks guys. The diagram i had did not have the breather on it at all. Much appreciated.  
    • Geez, engineers fees have definitely gone up. Mine back 2007 cost me all of $300. Mind you, I had to go back to him a few times to get him to write the correct things on the report after he'd inspected it. Things like wrong exhaust size, wrong wheel sizes, etc etc.
    • Can we see a scan of the original quote? The problem with engineers (and by this, I mean, all engineers across all engineering industries) is that there are "engineers" and there are "engineers" (you'll have to imagine the two different vocal emphases on those two versions of the same word. Engineering is a mindset - your farm kid who spent his life rebuilding the tractor will likely make a good engineer. The farm kid who spent his life taking photos of butterflies.. perhaps not. But on top of that mindset, the modern engineer has to learn how to write so that there is absolutely no way of being misunderstood. Proposals/budget estimates/quotations are one place where this is absolutely vital. You have to delineate your scope of supply with extremely hard boundaries, and anywhere where there is any possibility of not being able to have such a hard boundary, you need to write language that will cover you from scope creep, cost overruns, the inevitable interference of the client or their "engineer", etc etc. Now, if your clients are the BHPs and the Rio Tintos of the world, and similar, then you get good at this. If you are an automotive engineer, pitching work to the great unwashed masses, your skills in this area might not be well developed, because you're only dealing with knuckle draggers trying to get a big block legal in a Torana. And when I say "might not"....I'd suggest there's a better than even chance that any such skills might be completely absent. So, we might be able to look at your quote and see what the opportunities are for rebuttal.
×
×
  • Create New...