Jump to content
SAU Community

Eoi Vspec34 Gtr

Adelaideprosound
 Share

Recommended Posts

Adelaideprosound Proficient

Adelaideprosound

Posted
Posted (edited)

Hi guys

Just an expression of interest wHether anyone would like to purchase the Brembo brakes of my 34 gtr number plate VSPC34 front and rear, will come complete with rotors, front are slotted rear are factory, calipers obviously, Have just installed EBC red ceramic brake pads in front and done about 200km since new. Rear pads still have heaps of meat left on them and also have a brand new set of EBC red ceramic pads rear. The pads cost me $650 for the front and rear and basically will go together with the whole kit.

Asking price $2500 the lot negotiable. These will be removed once my track brake kit comes in from Japan. These can be viewed right now on the car.

Also selling the factory 34 GTR seats. will be removed upon arrival of race seats.

Can also be viewed in car.

Asking price $2000 negotiable.

This is an expression of interest guys so please keep opinions to a minimum.

Photos of the car will be available tonight.

Anyone wants to talk price my number is 0402237825 name is George for those who dont know me.

Thanks in advance.

Edited by Adelaideprosound
Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/
Share on other sites
sebastion Proficient

sebastion

Posted
Posted

thats a really nice gtr mate, also you should have no worries selling the brakes at that price, lots of people chasing them at the moment... also the seats are well priced, and all look to be in good condition... where abouts are you located sorry mate (if you have already stated so)

cheers mate

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4780438
Share on other sites
Adelaideprosound Proficient

Adelaideprosound

Posted
  • Author
Posted

I am in Adelaide. I am happy to post interstate via Fastway couriers , and i would appreciate no low ball offers because you will only get decline. This is not a desperate sale. These parts are of a well looked after GTR.

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4780507
Share on other sites
  • 1 month later...
Sparkys Community Regular

Sparkys

Posted
Posted

Possibly......but I have a noob question, would these fit behind Volk GT-C's in 17 x 8 +38 offset on an R32? I'm guessing not...

but if they do, is there an off the shelf adaptor I could buy to fit the calipers to the R32 hubs?

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4891421
Share on other sites
Adelaideprosound Proficient

Adelaideprosound

Posted
  • Author
Posted
Possibly......but I have a noob question, would these fit behind Volk GT-C's in 17 x 8 +38 offset on an R32? I'm guessing not...

but if they do, is there an off the shelf adaptor I could buy to fit the calipers to the R32 hubs?

To clear the brakes if your Volks are the face2 design then there wont be any issues with clearance. As far as the hub deisgn since i have never owned an r32 i dont know. And yes you can fit these brakes to an R32regardless of hub design.

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4895815
Share on other sites
M I K E Mentor

M I K E

Posted
Posted
To clear the brakes if your Volks are the face2 design then there wont be any issues with clearance. As far as the hub deisgn since i have never owned an r32 i dont know. And yes you can fit these brakes to an R32regardless of hub design.

bear in mind the difference in caliper mounting bolts. models prior to r34 use m12 bolts to mount the calipers, where r34's use m14. to fit r34 calipers to, say, an r32 or s14 etc you will either need to helicoil the calipers to take m12's or drill out the hubs to take m14's

Link to comment
https://www.sau.com.au/forums/topic/284255-eoi-vspec34-gtr/#findComment-4900942
Share on other sites
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Komdotkom
      High temp brake fluid?

      By Komdotkom · Posted

      Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...