Jump to content
SAU Community

Recommended Posts

Hi guys im new to this forum

Starting on this new project..and would like your thoughts/comments.

Not going too crazy with the mods:

R33 Gtst gearbox

S14a rear diff

HKS 28/35 TURBOS

upgraded fuel system etc..

custom fab for intercooler and piping

Car is at Advan, expect a 4-6 month build, will post photos of the build

Link to comment
https://www.sau.com.au/forums/topic/284360-rb26-powered-s15/
Share on other sites

would like some feedback about the Hypertune plenum also......

may have issues clearing clutch master... ooh and say goodbye to the nice chassis balance you had with the SR :D

You can use a gtr style radiator cooler and piping kit, no need for custom if your budget is stretched. Here are some pics of the old setup (T517Z, GTR radiator, cooler kit and piping kit unmodified). I will post up the latest pics 2moro with the K5 and greddy plenum (which fouls the clutch slave badly).

20070522_6fffa7bb2343b5bfd85e4W2hae.jpg

20070522_21302eaff9157edb2abeQtGZXa.jpg

Edited by URAS
x2. Friend of mine has one with a monster turbo set up on it, he can barely make 1/2 throttle in 4th without it smoking the rears up.

Very cool, but IMHO very pointless if you cant enjoy that power.

Smoking 4th at 1/2 throttle could be a very enjoyable way to use the power..

x2. Friend of mine has one with a monster turbo set up on it, he can barely make 1/2 throttle in 4th without it smoking the rears up.

Very cool, but IMHO very pointless if you cant enjoy that power.

4th gear wheel spin at half throttle??? this i need to see to believe

4th gear wheel spin at half throttle??? this i need to see to believe

Ok i tell a tall tale slightly. It was on a damp racetrack :)

Every time he went passed i was waiting for full boost, gentle 2nd, gentle 3rd spool spool, 4th, spool spool smoke smoke sideways sideways, back off.

Put it into the kitty litter once and buried it up to the sills :)

Cant remember the exact specs, but it did have a reasonably large high mount. So im guessing the lag, and maybe sudden power doesnt help? Not sure.

It was very easy to keep up with him in my stock turbo R33. Most amazing thing to watch tho ever time he got on the power it just spun the wheels, made orgasmic noises and didnt get any further infront of me haha

I can believe it would turn tyres.

Mine would turn coming onto boost in 3rd with 370rwkw and that was just on the freeway, just as it ramped up - traction disappeared.

And my grip is quite good (280rwkw, never brakes traction at all unless im savage in 1st to 2nd gearchange)

So with 2835's you are looking at worse than what i was getting.

here are the pics with the larger plenum, rear of plenum fouls the clutch master and both require about 3mm worth of shaving (6mm total). I also slotted the engine mounts and carriers.

please bear in mind the car is dummied together for dynoing and is not complete and tidy.

post-34927-1251246306_thumb.jpg

post-34927-1251246357_thumb.jpg

Ok i tell a tall tale slightly. It was on a damp racetrack :P

Every time he went passed i was waiting for full boost, gentle 2nd, gentle 3rd spool spool, 4th, spool spool smoke smoke sideways sideways, back off.

This is the T51R SPL RB26 one that was at Taupo? Its not very sensible :) Yeah RWD with over 400rwkw without drag radials isn't a good idea, Ashleys 25t on normal road tyres had no traction in 1st, 2nd and 3rd and the increase in traction in 4th actually made it seem more dangerous than the lower gears. Something very unnerving about passing 160kph and the back end starting to wander!

This is the T51R SPL RB26 one that was at Taupo? Its not very sensible ;) Yeah RWD with over 400rwkw without drag radials isn't a good idea, Ashleys 25t on normal road tyres had no traction in 1st, 2nd and 3rd and the increase in traction in 4th actually made it seem more dangerous than the lower gears. Something very unnerving about passing 160kph and the back end starting to wander!

Yeah i guess thats the one Lith! White?

Dam impressive car. Looks amazing too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...