Jump to content
SAU Community

Ms Sydney To Gong Ride 2009

JAS-25T

By JAS-25T,
in New South Wales

 Share

Recommended Posts

JAS-25T Grand Master

JAS-25T

Posted
Posted

gallery_8001_2894_17834.jpg

Hey Everyone,

I'm sure most of you have heard about the Sydney to Gong ride, for those of you who haven't, it’s an annual event where people get together in teams or as individuals to raise money for people with Multiple Sclerosis (MS). The ride commences from 2 locations either St Peter's (90km) or Engadine (58km) and ride down the beautiful coast line to one of the best places in the world…..Wollongong

MS stands for Multiple Sclerosis, a disease of the central nervous system affecting more young adult Australians than any other neurological condition. People are typically diagnosed in their twenties and thirties, with the average age of diagnosis 30. Interestingly three times more women are affected by MS than men and it is more common in cooler climates. In Australia, over 20,000 people currently have MS, however this figure is increasing as diagnosis methods become more advanced. For more information on this disease you can visit the MS society website by clicking on the MS logo below.

MS-logo.jpg

While some people do the ride more so for the fun of it, I am entering this year, mostly to raise money and awareness of Multiple Sclerosis (MS), as this is something that is close to my heart after my partner was diagnosed with MS mid 2007. Since then, we have been dedicating a lot of our spare time and spare cash, helping out the MS support organisations that help those with MS, including volunteering at 2007 Sydney to Gong ride event, which raised over $1.3 million and riding last year which raised over $2 million! I have also been involved in other charity fundraisers in the last few years such as “Shave for a Cure” (which helps kids with cancer) and “Movember” (which helps with most of male health issues).

This year I will be riding the long course which is 90kms long, and hope to make it to Wollongong in one piece. As a participant in the event, and the fact that I am no speed racer by any means, my goal is to raise the most money as an individual, and possibly as a team as well as raise a lot of awareness about the disease.

To give you an idea of the numbers I am trying to achieve, last year our team of 16 raised over $10,000 to help people with MS, This year I am hoping to double that and raise over $20,000 Although this seems like a lot, I’d like to aim high. There are a few ways you can help me achieve this:

1) Probably the most fun option is to join my team (Amanda’s Team) and ride and fundraise with me! – This will include plenty of preparation and a bit of hard effort up the hills, as well as plenty of fun. Follow this link or contact me direct for more information on how to join Amanda’s Team, and event details.

2) Donate to our team or me as an individual. Small individual donations will be appreciated, just as much as large corporate donations will be. You can donate online by clicking here or by seeing me in person for cash donations. Don’t forget all donations are a tax deductible!

If you know or are involved with any companies, we are looking for corporate sponsors who will get good exposure in return, contact me direct for more details.

3) Volunteer for the event – there are both, positions leading up to event as well as positions on the day, which vary from letterbox drops, to handing out lunches, to packing bikes into trucks to be returned to Sydney. For possible positions please refer this page for more information and click on the “Volunteer” link at the top of the page. Valuable time that is donated as a volunteer is appreciated just as much as money. In fact, without the volunteers, there is no Sydney to Gong ride each year, so feel free to spend a day (or more) helping out for this event.

Here is a link to my page where you can keep up to date with donations, who’s on the team and see everyone’s individual pages from our team page. I also encourage you to forward this on to everyone you know to get as much support as possible.

My partner Amanda & I, along with every other person affected by MS would really like to thank you for your time and any contribution to my team and this event, every little bit counts and we really appreciate it.

Link to comment
https://www.sau.com.au/forums/topic/284378-ms-sydney-to-gong-ride-2009/
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • pogman
      George's R33 GTST build

      By pogman · Posted

      yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • The Bogan
      George's R33 GTST build

      By The Bogan · Posted

      I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • shortyboy
      Drive By Wire Conversion options

      By shortyboy · Posted

      Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • pogman
      George's R33 GTST build

      By pogman · Posted

      small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...