Jump to content
SAU Community

Brand New Works Bell Original Steering Wheel Released (330mm With Blue Stitching And Let's Enjoy Drifting Logo)

TheTunersGroup
 Share

Recommended Posts

TheTunersGroup Proficient

TheTunersGroup

Posted
Posted

large1126.jpg

Hi All,

The Tuners Group is very pleased to announce a brand new steering wheel from Works Bell, the Works Bell Original Steering Wheel (330 mm, Blue Stitching version with "Let's enjoy drifting!" logo).

The new Works Bell Original Steering Wheel Blue Stitching version is a finely crafted wheel made with the same attention to detail of all Works Bell's products.

large1129.jpg

It features incredible quality supple synthetic leather, blue stitching, and the eyecatching "Let's enjoy drifting !" logo on the centre spoke of the steering wheel, highlighting Works Bell's heritage of supplying steering wheels and quick releases to many of the world's top drift teams in Formula D and D1GP, including Toshiki Yoshioka and the iconic Team Orange.

large1127.jpeg

The red stitching version has a diameter of 350mm. The new blue version shown on this page has a diameter of 330 mm.

It is finished off perfectly with the Works Bell Original Horn Button, which is included with every Works Bell Original Steering Wheel sold.

Pricing and more info here ...

http://www.tunersgroup.com/Online_Store/wb...ginal_blue.html

- The Tuners Group

 Share
Go to topic listing


  • Latest Posts

    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Hey all, I did a voltage test with the car (video attached) not running for 3 days. And here is some interesting stuff: - Battery voltage is 12v (I had the key in the ON position) - Drops to 9.76v while cranking then quickly goes up to 14.5v - You will notice there was a sorta slow start but not as slow as it usually is. - Idle surprisingly was better at just over 1,000rpm instead of 1,100 rpm. - I turned on the A/C, radio and headlights in the video and the voltage remains the same - I haven't cleaned the grounding wires on the chassis yet, that's next. - Battery drops to 12.6v when I turn off the car and wait a bit Seems like I might have a parasitic draw? I do have an immobiliser system which does drain the battery more of course but was wondering if there is anything else I should be looking at fixing? Does the ground wires on the chassis have anything to do with the low 12v?        SAU.avi
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      My lord that is some low oil pressure as minimum in the manual! I guess the big part will be seeing how it changes as the engine gets more spirited use.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Turbotapin   so I am about to be mounting mine up been waiting for the body to get finish at paint. I had a question. I was told our Speedo sensor it originally in the transmission but the cd009 is in the diff on the z. How did you get around this? 
    • acsplit
      SAU VIC Motorkhana Saturday 8th Feb + Entry List

      By acsplit · Posted

      Annd we are full!
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      I definitely do recommend having a fab/grinding/dirty shed or area to keep all that grinding dust out of your main shed.  But you're right, it doesn't matter how much room you have you still end up filling it! I might even do a short video which will make it easier to fully take in the horrors of what I've created...
×
×
  • Create New...