Jump to content
SAU Community

Recommended Posts

RB26DETT Block and girdle, dipped, bored, honed and decked. Has all welch plugs removed, has been bored to 86.5mm. Has had deck faced to tidy it up a bit.Mains girdle fitted to check clearences measurements etc. Work on block cost $450, selling for $400 plus freight

Brand new Nissan RB26DETT crank, long snout version, still in unopened box $800

STD Coil packsx12, 6 of them were out of a 105000km car, removed due to upgrade, 6 were out of a 120000km car which i bought for spares and wrecking, these ran well with no signs of breaking down. $40 plus freight

Coil pack wiring loom $20 plus freight

Master cylinder BM50, 1" R32 GTR $50 plus freight

R32 GTR Starter motor $30 plus freight

White Passenger side door, complete with door trim $100

Heaps of other bits and pieces, put a request in as nothing is too small.

Still wrecking White R32 GTR, has got compliance plates etc

Thanks,

Link to comment
https://www.sau.com.au/forums/topic/284610-r32-gtr-wrecking-and-parts/
Share on other sites

Have also got Rear cradle, almost complete, needs the rear steering arms, comes with brakes/diff and all suspension arms etc $800 plus freight

4xGMAX wheels, great brake clearance, bit dirty and a few stone chips. 17x8 NO tires, would make great club day wheels R32 GTR Stud Pattern and offset $200

great prices mate! i wish i had spare cash...

What are you after mate? I am open to layby if you want something bad enough. I did it for Ali-Turko with a pair of turbos

Michael

0438911374

post-61423-1251099320_thumb.jpg

Got any brakes for sale??

Have got a pair of alcons to suit R32 GTR,

If you wanted too we could arrange something like a layby system or whatever if you wish

Call me on 0438911374

For sale, Alcon 4 piston and 320mm rotor brake setup for R32 GTR,

Thick long endurance pads with plenty of pad left, high heat pads.

Rotors, 2 peice slotted rotors, 320mm diameter, 36mm thick curved ventilated rotors. they will clear 16inch Enkeis, not sure bout std 32gtr wheels. Could probably modify to fit bigger rotors on

Come complete with rotors, calipers, pads, braided brake lines and the spacers, just one small mod and they are ready to go

All setup to suit R32 GTR, one small modification needed to hub assembly to put on.

Awesome brake upgrade, would suit targa/ track days etc, worked very well on my car

Call me if you wish to discuss or see photos. 0438911374

Oh yeah they can be yours for 2200

Michael

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You are perhaps suggesting that it is not a super car? Well....it's not an AU.
    • Dropped the MX5 of this morning to get the hardtop colour matched and some PDR done, they are also going to give it a buff to remove some "stubborn" swirl marks and light scratches in the clear coat Over the last few months the poor little thing has copped some shopping centre car park abuse, I try to not park in them, but hitting Westfield's a few times over the last few months has taken its toll, nothing really bad, but enough of a trigger for a "while we're in there" thingie  Once it's back and all the one colour, with a few dents and mark's removed I'll give some of these products a go and see what they're like  
    • A locally delivered Infiniti have remote start installed but don't come with the remote start key. You need a new remote start key and they just need it programed. And this is different to making/programing a new key that just starts the car.  
    • Cheers, and cheers for sharing so much of the build and also sharing the glimpse of what turns out to bring a lot of us poor decision makers together haha.  I do recommend learning more about how to manage it, if not considering getting a  formal diagnosis.  The discussion with the psychiatrist I got my diagnosis through was quite eye opening, things I'd not even considered to be ADHD related and hadn't mentioned were things she asked about out of the blue and were common themes with people with my flavour of ADHD.   It's not a label for people who are hyperactive and ill-attentive, there's more to it than that and some of it can be much more challenging or damaging - though there are of course two sides to the thing, and a lot of the stuff we have to go through and work on to live with it make us effectively "better" at other things as well. Aside from the fact that there is some argument I could have a bit of ASD seasoning in there (came up during the diagnosis, and neurodiverse things seem to not stay as a cookie cut) I suspect you need to learn more about ADHD if you are puzzled about how hyperfocus could possibly apply.  I *do* personally use "superpower" with quotes deliberately, but it's 100% an ADHD thing due to the exact reason that lack of focus is also an ADHD thing... Loosely speaking the inattentive side of ADHD isn't the inability to focus, it's the inability to control where the focus goes.  Not being able to sleep because brain is more interested in thinking about a stupid thing I said to a girl I liked 30 years ago, not being able to focus on work because my brain is more keen on putting together the torque management strategy we're going to try out with a drag car next weekend, not being able to focus on a conversation with someone I WANT to listen to and respect because there is a flickering light in my peripheral vision.    If I could just stop work and build the torque management setup right there and then I'd not hear anything else until it was done.  
×
×
  • Create New...