Jump to content
SAU Community

Recommended Posts

So iv'e managed to sell my 33. Well it didn't really take long but long story short I needed a bigger car for work and family. I am most likely picking up a stag tomorrow and as any typical guy am already looking at what mods to use and who to talk to.

I'm sure there's a stagea thread on here so anyone got any directions?

Oh and yes i feel bad for selling the line but at least I haven't strayed to far from the pack. lol

Cheers

Kane

Link to comment
https://www.sau.com.au/forums/topic/284646-stagea-advice/
Share on other sites

http://www.skylinesaustralia.com/forums/St...ussion-f82.html everything there. . . .

http://www.skylinesaustralia.com/forums/Bu...n-C-t92065.html buyers guide. . ..

when inspecting look for the rust spots, door mirrors is common they all have it, some are fixed some are not. but if you look in the first link and find my topic on strut tower rust, you'll see the drama's im having atm. BUT there was no sign of the rust 1 year ago when i inspected it.

good luck.

Link to comment
https://www.sau.com.au/forums/topic/284646-stagea-advice/#findComment-4783593
Share on other sites

I don't give a shit whether you buy mine or not, but have a look at it as a template for mods :devil:

They need the standard RB 100k service upon purchase, they NEED good pads, tyres, shocks and alignment bushes, the springs and swaybars are an optional mods, but the others are a maintenance item. Radiator reco is a peice of mind thing.

Full exhaust saves fuel and makes it go better, same with FMIC.

Will add more after dinner.

If you are interested in making an offer on mine, feel free, if you have stagea questions, I will answer them whether you are interested in mine or not, here or in the stagea section.

-Ryan

Link to comment
https://www.sau.com.au/forums/topic/284646-stagea-advice/#findComment-4783772
Share on other sites

find that hard to believe, im lucky to see 400 out of a full tank, standard exhaust i was getting a minimum 400 once ran it till 450-60

interesting... my freeway fuel consumption improved massively when i did dump/front/cat, also helped around town.

have you done your cat? and done plugs lately?

Link to comment
https://www.sau.com.au/forums/topic/284646-stagea-advice/#findComment-4784069
Share on other sites

Ummmmmmmmmmmmm!

Start with these:(Pretty much the mods you did on the 33, but with bilsteins is perfect)

- 86dB 3" Turboback exhaust- JJR Stainless dump/front(heat wrapped), Catco 3" cat, custom(Rowville exhausts) 3" mild steel catback with mild mid and stainless magnaflow rear muffler.

- Apex Panel

- Knox automatics Shift Kit

- JJR Stealth FMIC( also have the stock FMIC, and an R34SMIC)

- Whiteline adjustable Sway bars

- Front castor adjustable bushes(Whiteline)

- Front camber adjustable bushes(Whiteline)

- Rear camber adjustable bushes(whiteline)

- Whiteline Springs fitted, standard supplied.

- Bilstein shock-absorbers with circlip height adjustment.

- Front RaceBrakes RB74 pads

- Front RDA slotted rotors(standard supplied)

- Rear Endless SSS pads

- Blitz Turbo Timer which also displays boost, Fitted with a kit for Alarm integration, professionally installed with the Alarm. Alarm automatically arms once car shuts off, even if you don't lock the car!

- Aus Standard Approved Alarm/Immobilizer with keyless entry.

- Alpine 9857i with iPod connector(might be swapped out for equivalent JVC deck, as i have had this HU in all my cars)

- Hertz Front splits(installed professionally with dynamat in custom mounts behind standard door trims)

- Hertz Rear 2-ways(installed professionally with dynamat in custom mounts behind standard door trims)

- Coustic 4ch Amp

- High end Audison cabling with fuse, all RCA's and power wiring.

- my sub amp will be taken out and yours fitted at point of sale, as i have an attachment to it :thumbsup:

- Bridgestone RE001 tyres.

exhaust is about 10months old. plugs were done 12,000k ago

What kind of cat?

Edited by RB_Ryan
Link to comment
https://www.sau.com.au/forums/topic/284646-stagea-advice/#findComment-4784356
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
×
×
  • Create New...