Jump to content
SAU Community

Recommended Posts

Hey guys, drove around today with no problems, but on my way back home, sounded initially like i had a flat tire, then realized was the engine.

Car sounds like a wrx (which isn't normal lol), if i'm rolling along, the engine will stutter, especially when accelerating. When travelling along, the engine will slow down then burst forward for a sec, then back down etc.

Got a booking fr Trojan on Thursday, but its a 40-50 min drive from my place, and seemed to be getting worse on the 10 min drive to my place.

Any idea what it could be? Just wondering if I should drive it on Thursday, or get it looked at by someplace close perhaps tomorrow or tuesday first.

The only weird thing I can think that happened, was yesterday, my nan was watering the garden and somehow lost the hose, went under the car and drenched the engine bay from underneath. I noticed the pod filter was a bit wet but left it overnight/day to dry and like i said, it ran fine......

If you haven't guessed, i know next to nothing about this stuff...

Link to comment
https://www.sau.com.au/forums/topic/284648-engine-stuttering/
Share on other sites

If your pod filter's wet then it's very likely that you've gotten your airflow meter wet. Could be that. It could also be the electrical contact for the crank angle sensor has gotten wet, which isn't far from the air filter.

Could be your coilpacks starting to bomb out by coincidence, but that only really happens when you rev/boost it hard and flat footed (initially).

Does it matter if the engine's warm or not?

Thanks mate,

Nah dosn't matter if the engine is warm, drove home which was like 15-20 min drive, did it the whole way

Should mention that my engine is stock. just got the pod and zorst.

Edited by 33Sedan

my silvia (RB20) sounded like a wrx when running on 5 cylinders on idle but as soon as you started driving itd run on 6 cyls. possibly coils. just get some splitfires and see what happens.

could it be the spark plugs not firing right

I'm not sure, that was my initial thoughts. Hmmmm...... Might drive it to my local place, see whats wrong, if they gotta replace stuff i would prefer trojan to do it - except not really wanting to drive it all the way there lol.

.......or depending if you can get it to do it at idle

easy way to test the coils is by unplugging them one at a time. whichever one doesn't make a difference.... will have some issue with it.

man i had the exactly same issues here. my RB25de Neo have some trouble with missfiring. because it sounds like a WRX. probably chilling winter in canberra?

if u start the car in the morning (or when the engine is cold) it sounds ok for 5 minutes (because the car automatically retard the firing). after 5 mins the timing gets advanced to normal state, thats when the engine sounds like WRX.

i'm opening my intake plenum now and will open the cover tomorrow to check and replace the spark plugs / coils / looms. or even injectors.

http://www.skylinesaustralia.com/forums/Ne...49#entry4774549

if u'll bring it to local workshop, will u share the answers with me?

cheers.

.......or depending if you can get it to do it at idle

easy way to test the coils is by unplugging them one at a time. whichever one doesn't make a difference.... will have some issue with it.

One thing he's forgotten to tell you though don't unplug them/plug them in while the car's running... right James? :D

OMG TOOK THE SPARK PLUGS OUT WHILE IT WAS RUNNING AND THE ENGINE WON"T START NOW>.......

just kidding ;-)

Thanks guys, getting it towed to trojan tomorrow. gtrkat, your price was spot on! Thanks!

Trojan thinks it could be the spark plugs or coil packs ;-)

Will see on wed/thurs. Hopefully won't break my bank account...fingers crossed!

Good luck mate, i had an issue with mine not long ago where it would just stop accelerating all together, then it'd kick back in and cut back out, all within the space of a few seconds. Took it to Ed at AutoTech and it turned out to be the solder on the wires in the AFM had come loose and were barely making contact causing the PowerFC to think there was no airflow coming in and cutting the power. To make matters worse had a grounding issue at the same time and one problem masked the other.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...