Jump to content
SAU Community

Recommended Posts

Same old story here people

A few things have changed and i need some money for bigger ventures,ultimately id love to win lotto

but this is more realistic, so everything has to go!

RB26 HEAD,

ported n polished,

Grex 264 duration 9.15 lift cams

rear drain

has been tested and serviced

$2500

yet to be re-assembled,

set up for twin cam head

RB30 series 2 Block

crack tested

boared and hoaned

decked

New welsch plugs

CP pistons & rings 8.3 or 8.5:1

H Beam rods

ARP Rod bolts

ARP main bolts

new water pump

RB25 oil pump

Balanced,Grubscrewed,Collared crank

Race bearings

$5000

: Nismo rebuild gasket kit, with metal head gasket (no stem seals) $400

: Plenum $300

: throttle bodies & sandwich plate $200

: Ross RB26 harmonic balancer (new) $600

: Aeromotive fuel pressure regulator,braided lines,Trust twin entry fuel rail $600

: HKS oil pump (new) $2000

: TO4Z,Garret, custom surge slotted compressor housing, .81 rear (new) $2900

: Turbosmart 44mm wastegate,3 springs, (new) $700

: Sump, baffled, increased capacity, fittings for head and sump drain. (new) $400

: ARP Head studs (new) $350

: SARD 680cc injectors, $700

: Greddy Water pump and PS pump pulley $350

everything is new or as new condition

virtually everything needed to make a reliable 400rwkw

I would like to have a buyer for most parts before confirming a sale,

located in Tasmania, willing to post everything at buyers expense.

if someone is after a few parts we should be able to work something out.

basically im guaging interest. need everything gone, otherwise ill keep and install it.

pics on request

prices are as listed,i think they are reasonable.

if you have an offer or better idea of pricing PM me to discuss.

no negative comments please

contact via PM

cheers

Link to comment
https://www.sau.com.au/forums/topic/284776-rb26-head-rb30-block-garret-hks/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...