How Do I Get My Loom Through My Firewall?

[beRwick_GTRage]

i need to remove my rb20 loom from my r32

But im having trouble getting the loom through my firewall.

is there an easy way to get it out?

thanks

Edited August 24, 2009 by beRwick_GTRage

[mosquitocoils]

Does the other end unplug further in? Maybe you can take it out the other way by doing that, if that end is smaller... I'm not sure though.

[blind_elk]

You need to remove the LH guard.

[beRwick_GTRage]

You need to remove the LH guard.

i have a bodykit which has been molded to the front guard. Is there any other way?

[blind_elk]

There might be, but I found that to be the easiest way.

[BH_SLO32]

i have a bodykit which has been molded to the front guard. Is there any other way?

You shouldn't need to remove the front guard only the guard inner liner (above the wheel) to reveal the loom where it passes through the firewall. You will need to remove the ECU plug, body loom attachment plugs (3 off) and relays one at a time through the firewall and into the guard area. I have found it easier to then pull the rest of the loom (in the engine bay) through the inner guard into the left guard area.

Hope this helps.