Jump to content
SAU Community

What Larger High Impedance Injectors Are Available For Rb20det ?

discopotato03

By discopotato03,
in Engines & Forced Induction

 Share

Recommended Posts

Cjmartz2k Proficient

Cjmartz2k

Posted
Posted

I've bought injectors for my jeep stroker motor from them before. Real good customer service. I recently had the injectors cleaned and flow tested after running them for a couple of years, and they were closer in spec to each other than my nismo 740's I used to have. I think since they specialize in moving a lot of injectors, they get a lot of 100 or so if the same type, test them, match up the ones that flow the closest, and get pretty good results. I think they mostly deal with OEM applications though.

bubba Grand Master

bubba

Posted
Posted
Were they a Hi Flowed injector or a standard item , high impedance I gather .

Cheers A .

Off-the-shelf drop in replacement (except for plugs, they were supplied), high impedance, 550cc's.

Same as Sards.

D_Stirls Veteran

D_Stirls

Posted
Posted (edited)
are CA18DET injectors bigger because they'd work?

no CA18det are low impedance, CA18de's are high impedance and they are only around the 290cc mark.

have a look here, the biggest drop in are 550cc but if you want to change the rail you can go up to 890/900cc

http://www.injectorsonline.com/

P.S. Just wondering why you aren't interested in wiring in the dropping resistor, i was under the belief that low impedance injectors are easier to control at low duty cycles?

Edited by D_Stirls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      R34 GTT idle problem

      By Dose Pipe Sutututu · Posted

      If you don't touch the CAS, then you're fine.
    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • Shoota_77
      Cleaning my wheels 😍

      By Shoota_77 · Posted

      I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • The Bogan
      Cleaning my wheels 😍

      By The Bogan · Posted

      I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
×
×
  • Create New...