Jump to content
SAU Community

Recommended Posts

As stated in title, wrecking a 1997 R33 SII Skyline.

The vehicle is black in colour and was a manual.

Most of the interior parts are still available. All panels and headlights on the front of the vehicle has been sold.

PM for any parts required.

Prefer pickup on heavy parts, but don't mind posting smaller trims.

Thanks!

Edited by DRFT33
Link to comment
https://www.sau.com.au/forums/topic/285065-wrecking-1997-r33-sii/
Share on other sites

hey mate just wondering if you still have the diff? if so does it have a 2 or 4 bolt rear hat that bolts it to the cradle? if it is 2 bolt which i think it will be would you be keen on selling/swapping just the rear cover, cheers. im in adelaide aswell by the way

As stated in title, wrecking a 1997 R33 SII Skyline.

The vehicle is black in colour and was a manual.

Most of the interior parts are still available. All panels and headlights on the front of the vehicle has been sold.

PM for any parts required.

Prefer pickup on heavy parts, but don't mind posting smaller trims.

Thanks!

As stated in title, wrecking a 1997 R33 SII Skyline.

The vehicle is black in colour and was a manual.

Most of the interior parts are still available. All panels and headlights on the front of the vehicle has been sold.

PM for any parts required.

Prefer pickup on heavy parts, but don't mind posting smaller trims.

Thanks!

disco potatoe - Sorry not seperating any engine parts but depends on what you're after? I have GT3582R turbo, X-Force high mount manifold, Tial 38mm wastegate, 3inch dump and screamer, braided oil and coolant lines for $2200. 80mm throttle body - $150. Let me know what you're after exactly.

pingping - I do have the ashtray. I can send you picture but it just looks like all the other ashtrays? Anyway - $20

Muges180 - As above, if pingping doesn't claim it, then the ashtray is yours for $20. Center console lid - $20

Zoidberg - Front and rear seats available. $150 for the lot. RHF seat has minor stitching come off about 1cm.

lolnic - $150 for all the seats if Zoidberg doesn't want them.

dor180 - Sorry, the locks have been sold.

2FST4U.R33 - handbrake tip available. The grip looks worn though? let me know how much you want to pay for it.

Turk1 - Sorry, front grille is gone.

Craig132 - Front brake calipers and rotors - $250. Rear brakes may have been sold but I will let you know.

codys97 - I'm not sure on the rear diff, I'll need to have a look but it is the VLSD (GTR rear diff) model so might be completely different from what you're after.

Darren33 - Not sure on what you're after buddy.

Bigmikespec, Aberax, Weezy, F9292 - trying to send PMs at the moment - will get one soon.

Hi there, i'm desperately looking for The R33GTS-T Crossmember, RB25DET Rubber Mounts & RB25DET Allumunium Engine Mountings, if you still have it i will take it. Please let me know ASAP. My email: [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sell it and buy something newer? 😛
    • Better then PooPooG... or is it PeePeeG? 
    • The steering wheel on my 97 s3 gtr is a little bit worn out, so im on the hunt for something mint. I notice that this type of steering wheel is on several other nissan's of the era.  Does anyone know if their all identical, or are there slight differences? I feel like gtr tax applies to anyone selling one, but if it comes from any other car the price is much less, even though its the same design.  Chat gpt says the material for the gtr is slightly different and it says gtr on the wheel, but every pic ive seen it just says nissan. 
    • I might have to say it.
    • Ahh... it's an early RE5R01A box, that means the pinouts I gave are wrong (they were for the RE4R01A 4-speed box)... I'll have to dig around in my docs to see if I've got that schematic (they used the same gearbox plug, with the vacant pin wired to the direct drive clutch solenoid)...prolly hidden away in a supplement somewhere... ...there were 3 variants of the RE5R01A ~ this early schema was what we called the 'dumb' 5 speed ; it's what jatco called a 'medium duty' box, with torque holding up roughly ~200ft/lbs or so, which was good for NA from RB20/25DE and up to around VG30 output spec. With the RB25DET (and VG33/35 mills), the only options they had was the 4-speed 4AX00 box, which had been beefed up to handle the extra torque (primarily for the VG35, but it also suited the RB25DET mill and others)...and the RE4R03 box in large 4WDs a lot of the time... ...the next variant of 5-speed was redesigned, stronger, and 'smart'...first ones had external TCU with internal (on valvebody) Shift Control Unit, pressure switches, and 2 x TSS...and the last ones had internal TCU+SCU setup, with CANbus control etc etc. @DRoc81 On the RHS of the box towards the rear, there should be a stamped silver ID tag -- what's the model number? Oh...and with the early 5-speeds, the torque converter control solenoid assembly should be replaced as well (31940-60X00)...it's a bit Murphy's Law ....if one has failed, bet on the rest not being far behind ...
×
×
  • Create New...