Jump to content
SAU Community

Can You Put The M35 Front On A Series One Stagea

RSVFOURUK

By RSVFOURUK,
in Four Door Family & Wagoneers

 Share

Recommended Posts

pixel8r Mentor

pixel8r

Posted
Posted

apart from the M35 front looking terrible on a C34, the bigger issue is that Nissan completely changed the chassis - with major changes to the front end. The front wheels on a M35 are much closer to the front of the car, with the engine's center of gravity now behind the front wheels. You may have heard of "Advanced Front Midship" - well thats what Nissan call it. They use this new platform for most of their new cars, including 350Z, V35, and even Murano and others.

Basically, your wheels wont line up with the guards (just guessing but it seems obvious to me), among other things.

You may be able to find a custom kit that will fit but then it wouldn't look exactly the same. I would go with the other suggestions instead and try a car around the same year. Chances are these would be built very similar and not have anywhere near the structural differences that the M35 has...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Comfortable replacement seats for R32 GTR

      By Murray_Calavera · Posted

      As strange as this sounds (as they are fixed back), my Bride Xero CS seats are the most comfortable seats I've used.  I vote go genuine.  The only downside I've found is on very long drives, you can't reposition your body while driving. So even though its comfy, being locked in the same position eventually becomes uncomfortable. I find myself stopping every 3 or so hours to stretch my legs on long drives. 
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      You don't have to be bored driving a Camry. Not based on the way that a couple of f**king Ubereats/Didi/othersortofmethaddlednightshiftattheservicestationrecentimmmigrants were piloting them on the way to work this morning. f**k me dead!
    • GTSBoy
      Comfortable replacement seats for R32 GTR

      By GTSBoy · Posted

      FWIW, the Bride reps are really nice to sit in. The only complaint I have, other than the tear in my bolster, is that the velcro used to hold the backrest cushion in place, up under the headrest, is a little obvious and intrusive and could probably be done better. I don't know if that is a "feature" on the genuine ones also though. I haven't looked at a genuine one like the ones I have, only some of the older models. The other thing is, even though I bought the CF ones, I think the CF is really just decorative, over the top of the same FG as the normal seats. And so they really aren't light. Between the solidly built CF/FG seat, the steel frame in the recliner mechanism, and the solid-arse seat rail, they are probably heavier than even the stock seat. They are a serious lift to get in and out of the car.
    • GTSBoy
      ugently need expert / experienced opinion

      By GTSBoy · Posted

      Yes, and so the barest minimum power target is the one that makes the most sense. Massive power is fun, but you can only use it for 1.5s at a time, and only every now and then. Medium power levels allow you to enjoy the car far more often and for longer. 500 engine HP is just below 300 rwkW which is about the maximum that is sensible for any street car really. And for a 2.6L six, it will still leave you with a decent boost response and some sort of linearity of power delivery. As you get up towards 400rwkW the onset of power tends to be increasingly like a cliff and you need drag radials to keep the ground in proper contact with the car, and.... it's just not a car for driving around any more.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I already reached that conclusion myself after reading up a whole bunch and watching various videos from multiple sources. Don't know yet how I'd best manage that with the least amount of headache. Probably pulling the sump and just welding on a AN10 adapter or something. I also think it's healthy to take most opinions with a grain of salt, because experiences differ wildly and especially Aussies - when talking about RBs - don't know a world below 600whp drag builds. Personally I doubt I will ever take my R33 racing, so it's going to be a street car with the occasional spirited drive. Hence why I am (so far) under the impression that I'm going to be fine with a stock-ish engine for a while.
×
×
  • Create New...