Jump to content
SAU Community

Recommended Posts

Hey everyone, just got a few queries about the R34 N/a skyline's . If anyone can answer any of these questions, thanks very much :) appreciate it heeps.

Are these cars fast for an N/a in the low rev range?

Also, are they faster in the higher rev's or in the lower rev range?

Are there any mods to increase the power in the low rev range?

Thanks in advance.

Luke.

Link to comment
https://www.sau.com.au/forums/topic/285365-r34-power-in-the-low-rev-range/
Share on other sites

they are a 2.5L engine, so will the be fast in the low rev range? no small engines and fast in low rev range doesn't really go together. that is why they rev up to 7000rpm. if you want speed without reving high, then go a falcon or commodore.

mate any car can be fast enough to get yourself warped around a pole, im sure a N/A skyline weather a R34 or not will be fast enough.

there is not a lot you can do without spending big money to get the power of a turbo.

Edited by sydking

I disagree, my na r34 is fast down low, they have more torque down low. Cant really say that there any faster in the high rev range. My car pulls pretty hard (for an N/A) after 2000rpm in 1st gear and then 2500 in 2nd and about 3-3500 in 3rd. all depends on how you like to drive your car. Only difference iv found is that reving high you dont change gears as often, thats *one* of the main differences..

Im not trying to argue or anything but some of the fords and holdens iv driven or driven in, are not fast down low, they are heavy and take a bit of time to get there power out.

Edited by R34 -_-
  R34 -_- said:
I disagree, my na r34 is fast down low, they have more torque down low. Cant really say that there any faster in the high rev range. My car pulls pretty hard (for an N/A) after 2000rpm in 1st gear and then 2500 in 2nd and about 3-3500 in 3rd. all depends on how you like to drive your car. Only difference iv found is that reving high you dont change gears as often, thats *one* of the main differences..

Im not trying to argue or anything but some of the fords and holdens iv driven or driven in, are not fast down low, they are heavy and take a bit of time to get there power out.

that is actually incorrect. they aren't really much heavier than a skyline (depending on the model), but the reason they don't pull super hard is their tall gearing. to put it into perspective, the first gear on an auto v6 commodore is roughly as tall as second gear on manual 33. tha manual cars are not quite as tall, but still taller geared than a skyline. so next time you are out for a drive, try taking off hard in second gear and see how much slower it is, then keep that in mind next time you race a commodore or falcon. it puts into perspective just how well they perform considering this fact.

that said, i have owned a few aussie 6's and driven plenty more, and in manual form they are very quick in the low rpm area. as i said above, because of the tall gears they won't rev out quickly like a smaller engine with shorter gears, but the speed will rise quicker when compared with the rpm. you can feel the torque of them. that 1500 to 3000rpm power is very linear. what makes them feel slower is the fact that they don't have that urge come on higher in the rev range where the acceleration goes from being good to great. anyone who has driven a turbo s13 (or r32) then hoped into a turbo 33 will understand. the s13 is pretty average below about 4000rpm then it comes on nice and hard, however the 33 is nearly on full boost by 2500rpm so it doesn't feel as wild as the power is there from the moment you put your foot down so you don't get the rush, yet side by side they will perform pretty much evenly.

I'd have to say I did live with the tacho on the +4500rpm side, I really didn't feel the car was performing until the second butterfly was open and you had that nice change in pitch of the engine :P

I bounced hard of the redline pretty much all day in my 34. I know the auto could definately live with a higher-stall torque converter, the manual would be OK with some higher rpm launching.

  R34 -_- said:
I disagree, my na r34 is fast down low, they have more torque down low. Cant really say that there any faster in the high rev range. My car pulls pretty hard (for an N/A) after 2000rpm in 1st gear and then 2500 in 2nd and about 3-3500 in 3rd. all depends on how you like to drive your car. Only difference iv found is that reving high you dont change gears as often, thats *one* of the main differences..

Im not trying to argue or anything but some of the fords and holdens iv driven or driven in, are not fast down low, they are heavy and take a bit of time to get there power out.

Hey thanks for the replies everyone. This helped a lot, exactly what i was looking for :). Thanks again.

luke.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I much prefer that to an actual oil pressure issue, never would of thought it would of been a volt drop issue but SAU brains win again. Guess ill be turning down the oil pressure limit for the track and hunting some grounds. Ill hopefully update this thread with some high oil pressure and solid ecu voltage logs. 
    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
×
×
  • Create New...