Jump to content
SAU Community

Recommended Posts

Car is a 1995 r33 gtst with a rb26 gtr motor fitted to it. It has been engineered. The car is basically std with the exception og the gtr motor. it has a 3" exhaust but has a std muffler attached to it atm. Engine makes 200rwkw with no other mods. The enigne has 165psi in all cylinders on a comp test so the motor is good! It has a tein super street suspension that suits aus roads whichjwas bought brand new.! Comes with 17" mags with $2000 worth of tyres in goodyear F1's all round. Has a cd player and a gtr front bar. The rest f the car is std. With an exhaust, computer chip, injectors the engine can make 265rwkw+. The engine has new, gaskets all round, TPS, throttle body's, aac valve, crank angle sensor, igniter and split fire coil packs. All item except the splitfire coils are brand new genuine nissan adding up to $3500+. I have over 10,000 worth of recipts for the car. Car comes with a rwc for the price shown. I have owned this car for 9 years and i am not interested in time wasters. Car is in immaculate condition.

Pm me on here or call 0407362443

price is $12500 with rwc and 11 months rego.

post-1334-1251411129_thumb.jpg

post-1334-1251411177_thumb.jpg

post-1334-1251411212_thumb.jpg

post-1334-1251412227_thumb.jpg

post-1334-1251412240_thumb.jpg

post-1334-1251412261_thumb.jpg

post-1334-1251412273_thumb.jpg

Edited by markjh27

The car has done 115,000km, the engine has done 90,000km. all belts including the timeing belt and all pullues and the tensioner have been replaced in feb this year. as was the water pump. all genuine parts. I am located in melbourne , eastern suburbs. cheers Mark

  • 3 weeks later...
  • 5 years later...
  • 3 months later...

Given the dwindling number of 33s on the road these days...it's more than likely been written off or crushed or raced

  • 2 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 49719 is the cooler loop. Right at the front, LHS of that diagram. Return line from rack (LP side) goes to cooler loop on RHS front of car, then back under engine and returns to bottom of tank. 49717M is feed from tank to pump. HP line out of pump is thick rubber, followed by the hard line that runs down to crossmember and runs in parallel (but opposite flow direction) to the LP return line. Nothing goes anywhere near the firewall or interior of car. The closest they get to that is the connections on the rack.
    • Thanks, plan is to drain all fluid tomorrow and do smoke test to find out the leak.   Appreciate your help and want to understand how the system work. So cooling is achieved by the long loop not any rad? The diagram seems to suggest it connects to somewhere inside the cabin and I thought that is a cooler inside firewall. If you look at the diagram it seems to show it connects to something inside firewall. I tried chasing it but not easy unless I take loads off   i am confident pump is good as fluid goes in and it gets soft( steering) but as soon as I turn engine off , loads of bubble come to surface and overflow. When engine is on , fluid level is below minimum but when off it shoots off and thinking it is sucking air in. I suspect aluminium pipe may have a crack line or whole   smoke test with no fluid should be a good start and if needed will remove the pump   In addition, the one going under the engine bay is high pressure line and one directly connecting from pump to resorvoir is return/ low pressure?   finally I searched and suggestion is to use dexron 2 but that is discontinued so bought dexron 3 as all research suggest it is compatible and shouldn’t cause any issues/ blow seals. I bought two liter of dexron 3 motul atf
    • Don't worry about. Just don't try to drive hard enough to make boost and you'll be fine.
    • Yes. This has already been said. It is a loop of hardline in front of the radiator. Because.... the pump is on the LHS and the steering rack hydraulic connections are where they always are on a RHD steering rack....on the RHS. The high pressure line goes down under the engine, along the crossmember, like it does on all Skylines. Don't just throw expensive braided hoses/other kits at it. Work out what is wrong and fix that.
    • Still got the afm on the intake, clamps are shut tight, only loose hose is the one that goes from the j pipe towards the IACV, since it's next to impossible to find a factory hose and the barbs are different sizes (I'm still using clamps on this hose to try and help it seal on the iacv side) I've ordered parts to make up the hotside of the intercooler pipes, I'll plumb it in and see what happens in a few days I suppose The turbo's internally gated, can I just unscrew the tension rod to let the gate open?
×
×
  • Create New...