'93 Hcr32 Slave Cylender

[_Ryan_]

Hey all.

I know that Series 3 R31 box's were almost identical to R32 boxes, and that most Nissans and Datsuns of that era used the same $29 PBR slave, so before I go out and spend $70-100 on a genuine part http://www.kudosmotorsports.com/catalog/ni...33r34-p-59.html or http://www.rhdjapan.com/jdm/Nissan-OEM-Clu...2-Skyline-59832

Can anyone confirm exactly which slaves are interchangeable with the box behind an RB20DET on an R32. I have read pretty much every thread I could find by searching, and the answer was never concrete. (eg here: http://www.skylinesaustralia.com/forums/R3...ml&hl=slave question was asked but never answered)

Thanks.

Ryan.

Edited August 29, 2009 by RB_Ryan

[_Ryan_]

slave has been confirmed the same http://forum.r31skylineclub.com/index.php?...0189#msg1270189

[XR Pilot]

For extra confirmation-ness, I've got an R32 RB20DET gearbox in my R31 with what appears to be a standard R31 slave.

[_Ryan_]

For extra confirmation-ness, I've got an R32 RB20DET gearbox in my R31 with what appears to be a standard R31 slave.

hard line might be different though

[WrenchesInTheGears]

good to know, how about masters are they the same too?

[XR Pilot]

hard line might be different though

Good point, I thought of that a few hours after I posted. Looked like a fairly standard Nissan flared brake-line style fitting from what I remember though..

But as far as bolt pattern goes its all good.

Edited September 3, 2009 by XR Pilot

[_Ryan_]

Ended up going an OEM item from Kudos, great turn around time and service. CBF changing the hardline if I ran into that which was a possibility.