Jump to content
SAU Community

Recommended Posts

1993 R32 GT-R Midnight Blue/purple Pearl colour

Advertising this car for my Dad.

This car has a brand new engine, only has run 2000kms since rebuild. the new engine included cylinder bore, new pistons, new oil/water pumps, balanced and nitrided crank, full head service and porting and a 1.2mm Grex metal head gasket. I couldnt possibly list everything included in this build but the build also included two brand new reconditioned high-flow turbos. This new engine produced 305rwkw on an untuned Veilside ECU with A/F running well under 11 on 0.8bar (12psi). So there is ALOT more power to be made with a tuned ECU or PFC and boost wound up.

The pics shown really dont give justice to this cars colour, it is the best colour paint i have ever seen and grabs alot of attention without looking over-the-top.

List of other Modifications:

Body/ Asthetics:

- Full respray in Midnight blue/purple pearl

- Full Nismo body kit

- Powder coated rocker covers (candy apple red w/pearl)

- Polished plenum, intake pipes etc

Handling:

- Tein height adjustable coilovers

- Enkie 17X10inch wheels all round

- Strut braces and sway bars

Power mods:

- 2 x fully reconditioned and high-flowed turbos

- Veilside tuned length SS front pipes

- 3inch high flow cat

- Veilside 4inch cat back SS pipe

- Invidia 5inch SS Muffler

- HKS tripple plate clutch

- Trust Drag intercooler 4inch core (massive!)

- Blitz SBC-ID boost controler (fancy looking new one. 4 channels)

- twin HKS Pod filters with adaptors

Reason for sale: uncompliant wife!

Price: $39,990

Now $35,000

Pictures:

GTR 1

GTR front

Interior

Engine bay

Engine 2

Polished plenum

Link to comment
https://www.sau.com.au/forums/topic/28561-r32-gt-r-305rwkw-wpics-sold/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

bbenny - i will leave your thread, but please read the rules - theres no advertising for other people on these forums, but because its your dad, i'll let it stay.

Christian

  • 2 weeks later...

i am serious after a car now.... but when i look at the price tag.. ermmm i have to say no.... hopefully your dad can bring the price lower ,,,, then may be i or some orther people might be interested .... this is because your dad are selling an R32 GTR on an R33 GTR price

Yes, i understand there are alot of cheaper R32 GTRs around, but i have to stress that this car has a brand new RB26DETT. Everything internally is new and has been ballanced strengthened etc. over $14,000 was spent on this engine only months ago. and has only run 2,000kms since its rebuild. It puts out amazing power at low boost, and has had all its support systems upgraded.

The person who comes to see and drive the car will understand. So untill then go and buy an R33 GTR.

I agree with bbenny. Rebuilding the GTR engine is not cheap. If you include all the mods, custom paint & wheels you have to expect to pay close to what bbenny is asking.

You have to remember, you pay for what you get. I've seen alot of R32's that are cheaper but miss the quality.

If people aren't interested in purchasing, complementing or requesting more information, there is no need to post such replies to threads such as this.

Take it or leave it, this is just my 2 cents.

All the best with your sale bbenny.

Yes, i understand there are alot of cheaper R32 GTRs around, but i have to stress that this car has a brand new RB26DETT. Everything internally is new and has been ballanced strengthened etc. over $14,000 was spent on this engine only months ago. and has only run 2,000kms since its rebuild. It puts out amazing power at low boost, and has had all its support systems upgraded.

The person who comes to see and drive the car will understand. So untill then go and buy an R33 GTR.

  • 2 weeks later...
keep the offers comming, all reasonable offers will be considered.

Ben.

What exactly was done in the rebuild of the engine (what parts were used?).

Does it have standard injectors?

Are the turbos ball bearing? When does the car make full boost?

I'm possibly interested in your Dads car if I sell my current car before this one is snapped up.

Well the engine rebuild included a full head service and porting, bottom end had the cylinders bored slightly so there is a slight increase in capacity. also a tomei oil plug or something was used (i dont know exactly what that does stops oil surge on launches or something?) the crank was balanced and nitrided/strenthened) all new pistons to fit the larger bore. new oil and water pump, trust metal headgasket. i dont know the exact specs of the turbos, but the quote read "high-flow ball bearing turbos" - as for full boost what psi do you consider "full"? it makes 12psi at about 3800rpm - compared to my RB20 with a 2530 mine feels more laggy. there is so much to list as to what went into the build. give me your email address and i will send all the details to you if you like.

Ben.

Well the engine rebuild included a full head service and porting, bottom end had the cylinders bored slightly so there is a slight increase in capacity. also a tomei oil plug or something was used (i dont know exactly what that does stops oil surge on launches or something?) the crank was balanced and nitrided/strenthened) all new pistons to fit the larger bore. new oil and water pump, trust metal headgasket. i dont know the exact specs of the turbos, but the quote read "high-flow ball bearing turbos" - as for full boost what psi do you consider "full"? it makes 12psi at about 3800rpm - compared to my RB20 with a 2530 mine feels more laggy. there is so much to list as to what went into the build. give me your email address and i will send all the details to you if you like.

Ben.

You have standard pistons which means i'd have spend about $5k to replace them with forged items. This includes replacing the head gasket, pulling the engine out of the car, purchasing the pistons etc.

I'd also have to get some aftermarket injectors to replace your standard ones while also replacing your ECU with a powerFC or similar. AFMs will need replacing if I get the car tuned properly at higher boost.

Let your Dad know that i'll offer $32k for it if the clutch is not too much of a pain.

You have standard pistons which means i'd have spend about $5k to replace them with forged items. This includes replacing the head gasket, pulling the engine out of the car, purchasing the pistons etc.

I'd also have to get some aftermarket injectors to replace your standard ones while also replacing your ECU with a powerFC or similar. AFMs will need replacing if I get the car tuned properly at higher boost.

Let your Dad know that i'll offer $32k for it if the clutch is not too much of a pain.

exactly what i was thinking mark!!!.. awesome car..but whoever buys it if its not me has alot of work to do ..and its a big project and alot of hassle once ure talking 300rwkw+...

benny.. can u please pm me ure father number again?? thanks

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
    • This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
    • Wives never seem to find things funny. Especially when they're trying to sleep, and you've found the new funniest thing ever. I've never seen someone be able to get try and be cranky with me, while they're holding back fits of laughter... 😛   Also, I tell mine it's payback anyway. She has BiPolar. So the household can get quite emotionally wild at times 😛
    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
×
×
  • Create New...