Jump to content
SAU Community

Recommended Posts

sorry to be off topic here but what happens if the notice of disqualification says *CANNOT APPEAL IN COURT* would i even be able to at least appeal for 1pt? i recently just got my probationary license disqualified, and now im always late for tafe and work whenever i catch public transport in the morning.

sorry to be off topic here but what happens if the notice of disqualification says *CANNOT APPEAL IN COURT* would i even be able to at least appeal for 1pt? i recently just got my probationary license disqualified, and now im always late for tafe and work whenever i catch public transport in the morning.

catch an earlier bus or train

How important is your licence?

(assuming it was by a radar gun) You can contest this in court and have a good chance of winning but it will cost you for $$ for a good lawyer. I believe the standard method is to ask the police for the guidelines of use, a certificate of compliance and a certificate of callibration for the radar gun. I essence you are challenging the accuracy of the gun and the procedures used by the user. (all of which I have been lead to believe the police are reluctant to produce)

There are specialists in this area and their advice should be sought.

Good luck with the first one. The new units must be calibrated every time before they can be used. The only chance you may have is that where the officer was positioned in relation to where you are may have given an inaccurate reading.

if you have a bucket full of cash you can still beat it based on their methods of calibration

i had similar thing police provided a piece of paper saying it was calibrated that day or the day before and i had a specialist tear them apart just a letter from the specialist cost me $800 the whole ordeal went on for 1.5 years and cost me like $1600, but i didn't have to miss a day off work and i was proven innocent which to me was worth it as i too was looking @ loss off license

Yeah sure mate, I can guarentee that no person will ever recieve a fine for breaching the speed limit by 2km/h let alone get branded a hoon for it but why let facts get in the way of a good rant :P

The poster admitted he breached the speed limit by 18km/h, doesnt deny it. Hes not a bad bloke nor is he a criminal, but the fact of the matter is he has breached one of the rules of the road by more than just a trifling amount. It is good to see he is more concerned with accepting responsibility for his mistake and going about trying to get his licence back.

Pepsinator I am off work for a few days sick, I know a lot of this stuff off the top of my head but unfortunately not exact numbers etc.When I get back I will see if I can find out some more details for you re this matter and avenue of appeals and/or what happens when you get your licence back.

the italics mean sarcasm. just so you know.

Self explanatory.....just saw that you realised what i meant....its all good

i cbf'd reading all the post but if you have a job just get ur boss to write a letter saying you need your car to get to and from work and you can usually get is... 3 of my friends have done that and hhave to stay on their p1's till 21(with curfew),20 and 21 lol, but at least you can keep driving

I HAS I HAS !

i got done for 80 in a 50 but they didn't have proof of the speed and did me for "exceeding speed in built up area" which was 3 points , then i got done for no p plates in my dads work car when i went to get dinner, and the cop at the time said the usual shit that "its up to motor reg to decide" , and well 100% of the time they disqualify you.

i got a letter of disqualification in the mail a week after i paid the fine saying id lost my license and that it was a breach of my probationary conditions.

i took it to court and had a letter from my employer and the judge was forgiving and understood what had happened and gave me my licence back

only shit thing is im on 1 point for the next 2.5 years but i don't see it being a problem as i learnt my lesson when i got done for 80 in a 50 and now i dont

speed anywhere no matter what.

Pritty much the same deal for me there mitchamus, got done for doing 80 in a 60.lost the licence and apealed it for work and went to court and pleded my case and got it back with 1 point. Im also the same as you mitch, i dont speed any where for anything. its seccond nature to me now seems i have been doing it for what feels like an eternity.i think its actually made me a worse driver tho. its made me that paranoide ill litrally look down at the spedo every 3 secconds or so.

But what really shits me off is my gf who speeds absolutly everywhere atleast 10 - 20 kmh over and in the 4 months or so we have been together NOT ONCE has she been done by a speed camera or radar.since she has been with me iv drilled it into her that its not on but she still does it,it just doesnt get through no matter what i do. Beleve it or not shes actually the better one out of her friends. One of them is by far the worse driver i have ever seen and im at a loss to how the F*CK she got her licence. once she managed to spin out of control at a right hand corner from a standstill on a dry road and end up in someones front yard. Shes never been done for anything ether. I cant wait for the day they get done and have to go through the same shit.

End rant.

EDIT: Oh and mitch i would be looking into what conditions are on your licence too. i thought after my 2.5 years were up id be moving onto my full licence......until i got a letter in the mail the other week saying that there are changes to P1 and L licence holders about using hands free kits and stuff. Now to my understanding i wasnt on P1 or P2 or anything like that as i got my licence long before that stuff came in and when i lost it and got it back that all happend long before it came into affect too. I tryed ringing motor reg to sort it out but after being on hold for an hour and a half i gave up. My licence runs out soon and if i have to be stuck on P2s for another 6 months ill be severly pissed off!

Edited by Jack88
sorry to be off topic here but what happens if the notice of disqualification says *CANNOT APPEAL IN COURT* would i even be able to at least appeal for 1pt? i recently just got my probationary license disqualified, and now im always late for tafe and work whenever i catch public transport in the morning.

I'm no expert in these matters, but I would've thought the notice was pretty self explanatory :blink:

Jack, it all comes down to getting cuaght at the wrong place in the wrong time.

You always see people doing huge speed runs on various roads at various times of the day and they never get caught, yet another person might be going 10k over the limit and get pinged straight away.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...