Jump to content
SAU Community

Recommended Posts

Hi all,

For sale is my 93' R33 series 1.5 M-spec. A very fine example of a clean R33 without the excessive modifications as it was used as a daily driven car by a skyline enthusiast. Not a single cent spared with Mobil 8000 or BP Ultimate fuel used in every fill up and with proof of every 3 month service/receipts with Motul & or Nissan oil & other Nissan genuine parts.

All are factory standard including Active LSD, Slip control, Nissan rear strut brace & ABS. Non-factory items include - Trust Grex gear knob, Kakimoto 3" exhaust, 3" X-Force dump pipe, K&N panel air filter, Exedy 'Sports Tuff' heavy duty clutch, R34 GTS-T wheels with almost brand new 235/45/17 Kenda Kaiser tyres all round, 20% tinted windows, Blitz turbo timer & other Alpine/MB Quartz speakers/headunit.

Engine:

144,196 kms

2.5L RB25DET

5 Speed Manual

Exedy 'Sports Tuff' H/D clutch

Side mounted stock intercooler

Stock boost controller (running @ 7psi)

Blitz Turbo Timer

3" Kakimoto full exhaust

3" X-Force front dump pipe

K&N panel air filter

Driveline & Suspension:

Factory standard suspension on all corners

17" R34 GTS-T wheels, with almost brand new Kenda Kaiser 235/45/17

A-LSD, ABS

Slip Control

Exterior:

Full M-Spec body kit with

side skirts, rear skirts with M-spec rear spoiler

Excellent paint condition, with very little marks

Interior & Sound system:

Alpine headunit with 6" MB Quartz Front Splits

Alpine 6" by 9" rear speakers

Interior in immaculate condition

A/C refilled with gas June 08'

Trust Grex gear knob

Nissan rear strut brace

Price: $12,500 negotiable with RWC/rego till Nov. 2010

Contact: 0432 575 951 for any questions

post-51578-1251687993_thumb.jpgpost-51578-1251688007_thumb.jpg

post-51578-1251688026_thumb.jpgpost-51578-1251688039_thumb.jpg

post-51578-1251688063_thumb.jpgpost-51578-1251688094_thumb.jpg

post-51578-1251688107_thumb.jpgpost-51578-1251688130_thumb.jpg

Edited by Rashiq
Link to comment
https://www.sau.com.au/forums/topic/285845-black-r33-gts-t-1993-15-m-spec/
Share on other sites

Forgot to mention, new clutch was fitted by Revzone on 14/04/09 (receipts available) with flywheel machined, rear main seal and crank bushes got done as well. Royal purpple gear box fluid clutch bleeded with Martini racing fluid & re-adjusted clutch all done by Revzone.

Edited by Rashiq

Leaving the SAU club! Good luck with the sale.

Anyone looking for a clean skyline with no 2 dollar cheap modifications, this one is definately worth looking at. I would have to say that this is the best gear box in a r33 i have ever driven- meaning it has been granny driven :down:

Looks clean!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.
    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
×
×
  • Create New...