Jump to content
SAU Community

Recommended Posts

yep so after havn my skyline for 6 months i jus got my first yellow on sat night.

my mum was driving it (skipperin myself and a few mates to subi), took off from the lights, very slowly and then cops do a u turn and pull us over..

so aparantly my headlight was out - tru, and just a globed

they used a notepad to check the height of my ride (1- mum parked up on the curb so it was angled 2- when i asked if they had a tape measure they responded with, nope dont need 1)

i checked the heights when i got home, my sides are 120mm, front 130, rear 130, so i believe im fine there

they said my front struts have been cut for the radiator... even tho its all bolted into stock mounts (sais my mechanic mate)

and BOV needs to be plumbed - fair enough

also they have asked for a DB test.. all i have is a catback, like the very back part of the exhaust, the rest is stock.. its not even looud and they wouldnt of heard it anyway as mum was driving like a nanna.

thoughts?

Link to comment
https://www.sau.com.au/forums/topic/285904-lol-another-first-yellow-thread/
Share on other sites

Your lights need to work

You cant have an atmo bov.

No idea what your on about with the struts.

Even if your car is legal height the bov/light is enough to get yellowed.

If your worried about the volume of the exhaust borrow a dB reader and check.

ah yer, i know lights needa be working - duh lol, and i know about the atmo bov

ive got new globe and getting bov plumbed properly.

prety much jus askn if there is anything else i should get checked before going over pits?

This is starting to get a bit common, never seen so many ' i got a sticker' posts in such a short time. for height , you have to get under your car and measure how far your exhaust is from the ground, gunna have to ba around 120mm minimum to pass

^, ride height is from the lowest part of your car, which could be your exhaust or your diff etc etc.

and do you mean the metal struts that go down infront of your rad support bar?

most of the time, if theyve decided theyre going to give you a sticker, your going to get it. if you argue about something, theyll just find another reason why its unroadworthy..

I must admit those cops on saturday night were so rude.....

And one of the coppers was saying that the BOV is illegal and i was like "umm no its not, that is a factory item" (he didnt know it was atmo).

Funny thing was, his mum was driving and we were like WTF....and these cops legitimately had NO mechanical knowledge.....

Funny thing was, his mum was driving and we were like WTF....and these cops legitimately had NO mechanical knowledge.....

The Cops take anyone these days, they have really lowered the bar.

lol main thing i hate is that they didnt even have a f**king tape measure.. and they said "we dont need 1, thats what this notepad is for"

lol it was a fkn passport.. not a fkn tapemeasure. AND we were half on the curb, and they knew it

This is starting to get a bit common, never seen so many ' i got a sticker' posts in such a short time.

Agreed

The more reason for me to take the Camry out if I need to drive anywhere after dark on a weekend.

& to the OP good luck with getting your sticker removed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 馃挭馃徏 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 馃ゲ But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
    • That is correct,  I have a forged RB25/30det NEO hiding away safely and I wanted to use the very rare greddy vct adj cam gear on this new setup and so I just used the whole thing on my s1 instead of pulling it appear because I'm lazy af 馃槄馃馃徏
  • Create New...