Jump to content
SAU Community

Eoi: Apexi Ax53b70 Kit, Moonface Mf-r Dump, Sard Torque Control Valve, Z32, Ats Carbonetic 2 Way Lsd, Full R33 Gtr Interior, Bilsteins, Tomei, Pfc


Recommended Posts

Well im sick of renting and I have seen a house I would like to purchase so it maybe time to strip my R33. Yes I have only just finished it and have spent an absolute fortune building it using the best parts available but if there is enough interest in the following parts I will strip it all down with most parts removable the day a buyer wants them.

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

------------------------------------------------------------------------------------------------------------------------------------------------------

Apexi AX53B70 Turbine Kit - equivalent of HKS GT-RS but in some people opinion better as its more responsive and punchy on a RB25 they make a very responsive 250rwkw on 14psi and up to 322rwkw on a built 25 with 22psi. The turbo is a complete kit including braided lines, fittings, elbow etc. Price - $1650

Apexi Power FC complete with hand controller in excellent condition complete with purchase receipt. Currently has an excellent map for the stock turbo with FMIC, 3" exhaust etc. Price - $1400

PFC Datalogit interface complete with software, USB adaptor etc. This is the latest version that will work on any Power FC. Price - $475

Apexi Super Suction Metal Intake Pipe to suit RB in excellent condition complete with silicon joiners. Price - $225

Moonface MF-R Stainless Dump and Front Pipe to suit R32 R33 Stagea. Unique and extremely high flowing dump/front setup with excellent ground clearance due to design and distinctive engine note. Bought new and used for a few dyno runs on my just finished car still comes with the original Moonface gaskets and bolt kit + stickers. These are rare to find here in Oz and are $907 from Nengun at the moment http://www.nengun.com/moonface/exhaust-chamber-pro Price - $550

Sard Torque Control Valve - replaces your cat and gives excellent improvements in down low torque and also seems to decrease lag. Similar to the down low torquey feeling when you put a silencer in your cannon but with a silencer you have no power up top. With the SARD valve you have heaps of power all the way through the rev range. Price - $300

Z32 AFM complete with plug in excellent condition was bought new and barely used since - Price - $250

ATS Carbonetics 2 Way LSD 4.3 Ratio in S14/R33/R34 five bolt half shaft housing. The diff is in excellent condition and has barely seen much use since purchase with fresh oil. These diff centres are one of the best money can buy perfectly streetable with excellent traction. Price - $1000

Tomei HICAS Lock Kit to suit HICAS vehicles. The kit is used but still in good condition and easy to install. Price - $120

Full R33 GTR Interior in excellent condition including front and rear seats + front and rear door trims/cards. Price - $1400

R33 GTS-T Whiteline Handling kit including valved Bilstein Shocks, Whiteline Springs, Adjustable Front and Rear Swaybars, Castor Rods with Castor Adjustable Bushes. Price - $1500

R33 GTS-T Ohlins Rear Damper Adjustable Shocks and Springs. These shocks feature massive inverse monotube inserts. Price - $450 Pair

R33 GTS-T Series 2 UAS Carbon Fibre Vented Bonnet complete with Sparco Racing bonnet pins. Price - $600

R33 Custom Catch Can setup mounts on the drivers side strut toward and sits between plenum and fuse box. Features speedflow fittings, speedflow lines and a K&N Filter. Easy to fit comes with speedflow fittings for your rocker covers to replace the stock fittings. Installation takes 5 mins looks awesome and cost over $300 to have custom made. Price - $200

Genuine Rear Strut Brace to suit R33 in excellent condition. Price - $150

Brand New DBA 4000 Slotted Rear Rotors model 4908SL/R to suit R33 GTS-t, R34 GT-T, R32 GTR + others. Price - $280

Front R34 GT-T Slotted Front Rotors used very low kms but in excellent condition and freshly machined.Price - $200

R33 Genuine Ganador Mirrors painted black ready to fit, you can paint any colour to suit your car - $450

Cusco Front Camber Adjustable Upper Arms suit R33 R34 Stagea barely used in excellent condition. Price - $425

Cusco Rear Camber Adjustable Upper Arms suit R33 S14 in excellent condition - Price - $280

Nardi Steering wheel in excellent condition complete with boss kit to suit R33 - Price $200

Greddy Oil Cooler kit to suit R33 GTS-t would suit most RB's with just modifying core mounting brackets. The kit is new and has only been trial fitted will comes with original box, instructions etc etc. Price - $600

HKS EIDS Idle Stabilizer unit brand new in box perfect for stopping that stalling when you come off the loud pedal hard or smoothing out your idle - Price $100

GFB Stealth FX BOV kit complete with trumpet and normal BOV adaptors. Currently has the universal adaptor fitted also have a S15 adaptor kit I can supply with it for free Price - $300

R33 Series 2 Front Bar in black complete with the rare Nismo Lower Lip. Price - $400

R34 GT-T Stockies complete with new 225/45/17 rubber and all centre caps. Price - $500

Brand New Bodyform 400R Rear Bar and Side Skirts these people make the best fitting and highest quality kits hand made in Australia. Cost $950 + postage with receipt of purchase. Price - $800

Brand New R33 PSI Parts Du-Luck Rear Bar and Side Skirts cost $846 with receipt of purchase. Price - $400

------------------------------------------------------------------------------------------------------------------------------------------------------

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

Edited by nigelswazi
keen if u able to split front + rear swaybars.

cheers.

Prefer to sell handling kit as a kit at this stage as its all designed to work together but if I were to seperate the swaybars would be sold as a pair only.

As asked in PM's the Apexi Kit is a low mount kit to which you can still fit the stock heat shield for stealth mounting. The turbo also features an adjustable actuator.

Edited by nigelswazi

Hey mate, would you consider selling the 4 Bilstein shocks separately? What sort of $ would you take?

Also interested in the HICAS lock kit- does it include the module to intercept the HICAS computer?

Cheers

Edited by Yeedogga

What color is the stealth BOV and will the OLINS rears fit an R34GT-t ? and what spring rate ? :D

Edited by BASHO
Hey mate, would you consider selling the 4 Bilstein shocks separately? What sort of $ would you take?

Also interested in the HICAS lock kit- does it include the module to intercept the HICAS computer?

Cheers

Not really wanting to seperate the kit to be honest already had people interested in the whole lot

The HICAS Lock Kit includes the special shims and the module to intercept the HICAS computer

What color is the stealth BOV and will the OLINS rears fit an R34GT-t ? and what spring rate ?

The Stealth BOV has a silver body. The Ohlins will only fit S14/S15 and R33 GTS-t the R34 has a saddle type fitment at the bottom.

pics of catch plz mate

Will take some tomorrow of it fitted before I remove it

whats your absolute best price on the turbo???

Plenty of PM's regarding the turbo so the price I SMS'd you yesterday would be the best price champ

Edited by nigelswazi

hi mate

just in case u change ur mind, i'll take ur front and rear swaybar since @yeedogga also interested in the suspension set. maybe we can work something.

cheers.

hi mate

just in case u change ur mind, i'll take ur front and rear swaybar since @yeedogga also interested in the suspension set. maybe we can work something.

cheers.

Not really that keen to seperate due to the extra hassle of three lots of payment and posting but if I was to seperate would seperate as follows:

$1100 Bilsteins + Shocks

$375 Swaybars

$125 Adj Castor Rods

what housing is the apexi turbo it should have a few more letter like p20 or p25 etc at the end.

i had the p20 on my s14 and it made 260kw but if u have the bigger housing i wouldnt mine it for my 34 could u please find out for me dude

cheers

julz

what housing is the apexi turbo it should have a few more letter like p20 or p25 etc at the end.

i had the p20 on my s14 and it made 260kw but if u have the bigger housing i wouldnt mine it for my 34 could u please find out for me dude

cheers

julz

Hi Julz,

This has the P25 housing and on the box it specifies its made for a RB25 so perfectly matched to all RB25 setups

i sent you pm

PM Replied sorry about delay have been swamped with PM's and busy removing parts for buyers

----------------------------------------------------------------------------------------------------

The Apexi Turbo Kit is SOLD PENDING PAYMENT

ATS Carbonetic 2 Way LSD SOLD PENDING PAYMENT

The HKS EIDS, Z32 AFM and the Apexi Suction Kit are now confirmed sold and on their way to their respective new owners

Edited by nigelswazi

Just to update the following is still for sale

------------------------------------------------------------------------------------------

PFC Datalogit interface complete with software, USB adaptor etc. This is the latest version that will work on any Power FC. Price - $475

Moonface MF-R Stainless Dump and Front Pipe to suit R32 R33 Stagea. Unique and extremely high flowing dump/front setup with excellent ground clearance due to design and distinctive engine note. Bought new and used for a few dyno runs on my just finished car still comes with the original Moonface gaskets and bolt kit + stickers. These are rare to find here in Oz and are $907 from Nengun at the moment http://www.nengun.com/moonface/exhaust-chamber-pro Price - $550

Sard Torque Control Valve - replaces your cat and gives excellent improvements in down low torque and also seems to decrease lag. Similar to the down low torquey feeling when you put a silencer in your cannon but with a silencer you have no power up top. With the SARD valve you have heaps of power all the way through the rev range. Price - $300

ATS Carbonetics 2 Way LSD 4.3 Ratio in S14/R33/R34 five bolt half shaft housing. The diff is in excellent condition and has barely seen much use since purchase with fresh oil. These diff centres are one of the best money can buy perfectly streetable with excellent traction. Price - $1000

Tomei HICAS Lock Kit to suit HICAS vehicles. The kit is used but still in good condition and easy to install. Price - $120

Full R33 GTR Interior in excellent condition including front and rear seats + front and rear door trims/cards. Price - $1400

R33 UAS Carbon Fibre Vented Bonnet complete with Sparco Racing bonnet pins. Price - $600

Genuine Rear Strut Brace to suit R33 in excellent condition. Price - $150

Brand New DBA 4000 Slotted Rear Rotors model 4908SL/R to suit R33 GTS-t, R34 GT-T, R32 GTR + others. Price - $280

Front R34 GT-T Slotted Rotors used very low kms but in excellent condition and freshly machined.Price - $200

R33 Genuine Ganador Mirrors painted black ready to fit, can be painted any colour to suit your car - $450

Cusco Front Camber Adjustable Upper Arms suit R33 R34 Stagea barely used in excellent condition. Price - $425

Cusco Rear Camber Adjustable Upper Arms suit R33 S14 in excellent condition - Price - $280

Nardi Steering wheel in excellent condition complete with boss kit to suit R33 - Price $200

Greddy Oil Cooler kit to suit R33 GTS-t would suit most RB's with just modifying core mounting brackets. The kit is new and has only been trial fitted will comes with original box, instructions etc etc. Price - $600

GFB Stealth FX BOV kit complete with trumpet and normal BOV adaptors. Currently has the universal adaptor fitted also have a S15 adaptor kit I can supply with it for free Price - $300

R33 Series 2 Front Bar in black complete with the rare Nismo Lower Lip. Price - $400

Edited by nigelswazi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...