Jump to content
SAU Community

Arc/tabata Radiator, Induction Box And Intercooler To Cool Down Your Skylines !


Recommended Posts

Hey guys,

we have these in stock.

ARC best brand when it comes to cooling your skylines. Quality and straight bolt on.

Apexi Radiator typeS

GTR32

$600

ApexiRad.jpg

ARC 2Layer Radiator

For BNR32

$850

ARCBNR32.jpg

ARC Induction Box HCR32

$400

ARCHCR32.jpg

ARC Super Induction Box for ECR33

$440

ARCECR33A.jpg

ARCECR33.jpg

ARC TurnFlow Cooler Kit ER34

Brand New

$1550

ARCR34.jpg

Trust Sidemount cooler for ECR33

$400

ECR33Trust.jpg

ARC Induction Box BCNR33

near new condition

$450

ARCBCNR33.jpg

Tabata 36mm Al Radiator for late model BNR34

$880

TabataR34.jpg

For more info on these ARC gear or anything parts you see on my website please feel free to pm or call me on 0422 422 344.

Cheers,

Thuy

hay thuy

do u reckon that the r33 arc box will fit an r34 gtt

cheers

julz

love to say yes mate but I don't think so...

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...


  • Similar Content

  • Latest Posts

    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • ...oops. forgot the TCU end...
    • No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
×
×
  • Create New...