Jump to content
SAU Community

Recommended Posts

Hey mate

Just wondering how are the tyres on the rims? I was initially looking at a new set of tyres alone for $1000 so this could be good for me

Thanks,

Danny

Edited by squareznboxez
Hey mate

Just wondering how are the tyres on the rims? I was initially looking at a new set of tyres alone for $1000 so this could be good for me

Thanks,

Danny

Tyres are good - 70 - 75% tread.

bump

Hi, Al

please find out the cost of sending them down to Mordialloc Vic. 3195.

From the pic, it looks like your tyres, at least one pair of them is 225 not 215

call me on 0439 818008

cheers

Alex

Hi, Al

please find out the cost of sending them down to Mordialloc Vic. 3195.

From the pic, it looks like your tyres, at least one pair of them is 225 not 215

call me on 0439 818008

cheers

Alex

Hi Alex - if you know of the best and cheapest way to get them down to you, let me know and we can work out a deal from there. Thanks. Al
Hi Alex - if you know of the best and cheapest way to get them down to you, let me know and we can work out a deal from there. Thanks. Al

Yes - mistake in my ad. All tyres are 225's. If I can figure how to edit the original ad I will change that.

Yes - mistake in my ad. All tyres are 225's. If I can figure how to edit the original ad I will change that.

Al PM' sreplied to.

re: interstate couriers - I have no idea how much to send by courier - any shipping interstae at buyers expense and investigation. Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...