Jump to content
SAU Community

Recommended Posts

Hey All,

Had followed the tutorials about the install, but have come into a problem.

Car had Nissan Sat Nav and Cd Player.

I purchased a loom connecter so I dont have to cut the wires on the car. Ive matched all the wires with the corresponding wires as per the below site...

http://www.scribd.com/doc/4742725/The-Inst...e-Stereo-Wiring

The deck turns on, but for some reason the front drivers side speakers do not work.

I put the stock cd player back in to find they didnt work either - never noticed ;)

Im thinking as the car has sat nav, the wiring could be different? ie sat nav worked only on the front drivers side speaker...

Im hoping someone has had this prob before and can help?

Thanks Heaps!

Link to comment
https://www.sau.com.au/forums/topic/286688-r34-gtr-headunit-install-problems/
Share on other sites

thats not the issue. pull the whole lot out and on the very too there is a small black box plug the loose harness into that. speaker will work nav system runs that speaker and the external box switches the audio in/out.

Yes I did think it could be the speaker, so I took the door trim off, but all looked good. I did notice though the speaker wires were a different colour :P

Checked the black box...BINGO there were the two wires.

Thanks for the tip off Chris!

One other question...now that ive relocated the two wires from the loom to the black box, does it need to be plugged back in? (not reinstalling the sat nav atm)

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...