Jump to content
SAU Community

Recommended Posts

Hey guys,

just wondering if anyone has any experience of importing a car from the UK? Is it a lot more expensive than importing from Japan?? ie, shipping or movement/taxes of car in the Uk more expensive?

Any importers with regular UK dealings?

cheers,

daniel

Link to comment
https://www.sau.com.au/forums/topic/286757-importing-from-the-uk/
Share on other sites

Misinformation...it's a beautiful thing...

If for example, you're looking at a GT-R out of the UK, shipping is obviously more, but the big issue is that the car needs to have originally been sold on the Japanese Domestic Market, then exported to the UK, in order to be complied in Australia under SEVS. The only way to prove this is by having the export certificate provided when the car leaves Japan, which quite often goes missing in the UK if the car has been on-sold.

hmmmm... there are some pretty OCD owners on gtr.co.uk, i guess you could get lucky the jap documents.

so basically, even if i was after a modified R34 GTR, i'd still be best going from Japan??

sent ya an email as well Kristian :)

might start a R34 GTR thread...

you would be nuts to bother buying a japanese car from the UK. buying euro cars is another matter. but buying a modded GTR from the UK just makes no sense. as does all the advice in this thread except for iron chefs which as usual is correct.

kristian and ze baron, muchos gracias... was thinking outside the box a bit but it seems it's was a little too outside the box ;)

gtr.co.uk still has some killer 34 R's though :)

back to Japan hunting then, thanks guys!! ;)

  • 2 months later...

So if there is an 89 R32 GTSt i am interested in the UK, what sort of dollars am i looking at for importing and compliancing...assuming i have all the ex Japan paperwork.

I am real keen on picking up a car while i am here and rather then sell it when i leave would rather import it back to Aus as its a really nice car. (provided i dont bin it at a cold and slippery Ring :P )

Keep it for 12 months and is classed a s personal import provideing you can prove you have owned it for 12 months ie mot tax and insurance in the uk

Wehn i looked into bringing one of my cars over ( i hadnt owned it long enough though) cost were around 1500 to have it shipped....

troy, it's not really any different than importing one from japan. add shipping (probably around $1500-$1800 roro), 5% duty, 10% GST, few hundred for customs clearance, AQIS inspection, cleaning etc. then compliance around $2000-$2500 depending on what it is exactly and where you get it done and then you're away. :thumbsup:

Hi. I was thinking about doing this... and as I currently live in the UK, I thought that might be a good idea.

Though... looking at prices here, its probably alot easier to just buy what you want... Now all I need to do is figure out how to gift wrap a r32 gtr as a christmas present for my wife...

I know the pound is low compared to the aussie dollar, but by the time you add in all the charges, etc... It starts looking like importing a japanese car (even if is was sold by nissan uk) is a waste of time. I still have to dig right into the 'personal import' side of it - and even then, its only (just) worth it on R34 gtrs... (and only while the dollar is strong... and provided shipping is cheap, and the paperwork this side is cheap)

Really, I don't think I would bother.

Perhaps I should price a beamer and audi or two... nah

Yeah the pound is silly at the moment my sister is coming over to visit and she got virtually newt to the pound somat like $1.80!!

When i came over (to live here last end of last year) i got $2.53 to the pound excellent!!!

Edited by GODZ1LLA
  • 2 weeks later...
Does anyone know about importing European cars to Australia instead of Jap cars such as BMW or Benz ?

Had anyone done it?

Is it possible to get compliance in Australia?

http://raws.dotars.gov.au/rawswebpublic/RAWPubSearch.asp

If you are going the personal route don't get a car that can be sourced quite readily here by importers.

It is obviously better to get a car which cannot be imported here but for the fact it is a personal import together with it's relative rarity/value here vs cheap/commonality over there.

vauxhall vxr8 bathurst perhaps? some bogan is keen to want one here :blink: or something more common like a merc C or E class or 5 series BMW or GTI?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...