Jump to content
SAU Community

HKS turbo identification

Laurence

By Laurence,
in Engines & Forced Induction

 Share

Recommended Posts

Amaru Veteran

Amaru

Posted
Posted

The ID tag would suggest they are GT2530's. It looks similar (the turbo) to what I have on my car (HKS GT2530's), but mine dont have Garrett stamped on them anywhere (just HKS). Could possibly be a HKS 2530 compressor with some sort of Garrett exhaust housing, but im not too sure.

Laurence Mentor

Laurence

Posted
  • Author
Posted
that my friend IS a GT2530 from a GTR....it will have a 2 bolt pattern on the compressor outlet(094housing)....3 bolt pattern are GTS and Silvia housings....
Well I guess you did sell them to me as GT-R ones :cheers:

Thanks to Doughboy's thread

http://www.skylinesaustralia.com/forums/sh...ead.php?t=28787

I was able to see what they should look like

GT2530-4.jpg

...and with a quick run through photoshop

GT2530-5.jpg

DoughBoy Veteran

DoughBoy

Posted
Posted

I've taken a few pics of the rear of a HKS 2835R turbo to suit an SR20 or RB 20/25. They have the same flange pattern as the one fin your first post. Btw thanks for the free plug :)

Edit: Oh the pics are uploaded to the same link in the ad. That 2530 of yours looks like an SR20 one, not an RB20/25 one as the front cover is for the SR's bolt-on inlet tract. The RB20/25's do not have a HKS front cover, rather a Garret one with the front machined out and an aluminium insert bolted into place to accept a hose connecter directly onto it. Will take a pic of a spare RB20/25 one if I can be bothered.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Papichulo96
      Rb head oil drain dimensions

      By Papichulo96 · Posted

      Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • GTSBoy
      Need AC Compressor for R32

      By GTSBoy · Posted

      The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • Sxnjeet
      Help Understand GTT Boost Setup

      By Sxnjeet · Posted

      yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...