Jump to content
SAU Community

HELP urgent! GOT NO BOOSt


OSH13T
 Share

Recommended Posts

Hi all

there is something wrong with the r33.

Firstly after putting in a 2nd hand replacement turbo, i decided to take the car for a spin ... soon afterwards there was this weird sound, and there after accerlatation was poor and there was absolutely no boost.

The replacement turbo had done around 58000 kms.

There's this sound from the air filter,which may be coming from the turbo, it sounds like a pinging sound, or maybe the blade is hitting the wheel of the turbo.

Can u guys give me some suggestions to why im having no boost at all?

I checked the intercooler pipes to see if anything is loose, all seems fine.

PLEASE help, want to get back on the road...

cheers

Link to comment
Share on other sites

Sounds like someone sold you a dud turbo, i'd be taking it off if its making bad noises.

Yep, thats what it sound's like.

Pull off the intake and exhaust pipes and check that the turbo spins and doesn't scrape anthing or move on the shaft too much.

Also check that you still have an exhaust wheel. If it's still got an exhaust wheel then read on.

Did the turbo come with any kind of warranty? Was it from a shop? If not then do the following. It'll cost you a little bit of money but you will get a full refund on the turb.

Take it off the car and take it to a turbo specialist, say you've just bought it and want it checked out before you put it on your car. It'll cost you some money but at the end of the day you'll get a bit of paper that says either "turbo good" or "turbo ****ed". Take that back to the bloke who sold it to you and and tell him to ram his dud turbo up his arse.

I've been caught out before on my old rx7. Good bearing, dud oil seals. It was worse than the one i took off. Crack the shits and get a refund. Back yourself if they say it has no warranty. They have to give your money back if its checked out by a professional.

Link to comment
Share on other sites

check that your wastegate actuator arm is still connected and has not come loose. This happened to a mate of mine. He had no boost and a noise from the actuator arm rattling around. Should take no time at all to fix if thats the problem.

Link to comment
Share on other sites

Thanks for all the replys.

BHdave - Yea the turbo was bought privately and with no formal warranty. I just taken the car to the mechanics where they found that it is the turbo and something to do with the wastegate being closed.

I will try to get my money back fromt he guy i bought the turbo off. If not maybe hi-flo the turbo.

sinisteR32 - yea, definately will check if anything is in the exhaust once i get back to the mechanic

i ll keep you updated

Cheers

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...