Help R32 Actuator On R33

[R33NZSL33PA]

everything u all have said is already done so i just put the r33 actuator back on cause the 32 one just overboosts hard

[lachlanw]

you didnt re use some pipe and use the bit with the factory restrictor in it did you ? and its not something else like a chinese dump pipe ?

[gotRICE?]

you didnt re use some pipe and use the bit with the factory restrictor in it did you ? and its not something else like a chinese dump pipe ?

This is my guess too.

There is absolutely no reason why it should keep rising if you have set it up correctly. But if the wastegate isnt opening properly then it will creep.

When i was still using the stock dump pipe it would hit 10psi and not budge from 2500rpm till redline. But when i put on my custom HKS dump/front pipe, it would hit 10psi, spike for a split second to 11, then hold steady again. Free flow FTW.

[Basti]

basically, i've got just the pipe from the cooler pipe to actuator. the one with my finger on it, is blocked off with a bolt and cable tie. as is the other one running into the bov return pipe (i think thats where it goes. haven't had a look in a while)

[R33NZSL33PA]

basically i have done it that u all said be4 i put the 32 actuator on . It is now removed and running fine 4psi to 6.7 psi