Jump to content
SAU Community

Recommended Posts

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

Seriously 90% of the people complaining here don't work in the automotive industry and don't do their own work on their cars.

Says something.

seriously mate, being able to DIY repairs on your cars has nothing to do with this and I'm surprised it keeps getting mentioned. Fine, some may be mechanically inclined and do their own servicing. But the fact remains that the OP sent his car for "panel repairs" ...this is hardly a DIY for 90% of people on these forums.

when you pay a workshop to do work on your car, they owe a duty of care to ensure your asset is well taken care of and not used in a way where its not insured. If damage had happened in the workshop, then their insurance will cover it, but if it was taken for a fang...then it is not covered by any insurance and is dangerous for the vehicle owner and every other road user.

Edited by fcruz3r
when you pay a workshop to do work on your car, they owe a duty of care to ensure your asset is well taken care of and not used in a way where its not insured. If damage had happened in the workshop, then their insurance will cover it, but if it was taken for a fang...then it is not covered by any insurance and is dangerous for the vehicle owner and every other road user.

Incorrect.

Companies would have insurance to cover your vehicle while it is in their care.

I found out that someone at a panel shop wanted to call my first car as a write-off because they wanted to buy it for themselves...

They tried but we told em to just fkn fix it.

Picked it up and was pissing white smoke for the first minute of driving, dunno what they did but meh it was only a 31.

Talked to someone a couple years later who knew the panel beater and they told me the story.

Oh and there were dragons!

I found out that someone at a panel shop wanted to call my first car as a write-off because they wanted to buy it for themselves...

They tried but we told em to just fkn fix it.

Picked it up and was pissing white smoke for the first minute of driving, dunno what they did but meh it was only a 31.

Talked to someone a couple years later who knew the panel beater and they told me the story.

Oh and there were dragons!

Sif not tell us the story...

Well there was this girl I was sticking it to, and we broke up and she went out with this panel beater. And she had showed him a pic of my old car some how, and he told her that he worked on that car and wanted to write it off and buy it from auction or whatever.

And then there was a fight between that guy and the dragon and he got eaten. And then she told me at the funeral what his evil plans were. And then I laughed and stuck it to her again later on.

The moral of the story is don't fight dragons, and some panel beaters are jerks :P

Edited by SKYRYAN
Well there was this girl I was sticking it to, and we broke up and she went out with this panel beater. And she had showed him a pic of my old car some how, and he told her that he worked on that car and wanted to write it off and buy it from auction or whatever.

And then there was a fight between that guy and the dragon and he got eaten. And then she told me at the funeral what his evil plans were. And then I laughed and stuck it to her again later on.

The moral of the story is don't fight dragons, and some panel beaters are jerks :P

something, something, something darkside.....

Looks like someone went to get lunch in your car.

A certain level of trust is required when leaving your pride and joy with a shop. I have thought about crippling the PFC to make sure but have yet to allow any dodgey types to work on my R...as far as I know.

I can think of one specialist workshop I use and I have to bend their collective arm to take the R for a real drive. In the end it comes down to respect for the customer and leadership from the person in charge.

I can think of one specialist workshop I use and I have to bend their collective arm to take the R for a real drive. In the end it comes down to respect for the customer and leadership from the person in charge.

HAHA One day when its not raining. :P

Can someone please PM the name of this workshop? My issue is not that they drove the car without permission but that they lied about it afterwards.. what else are they prepared to lie about? Wouldn't trust my vehicle to a liar no matter how much it was worth.

It's the principle the car was driven without the owners permission in circumstances which don't require the vehicle to be moved. Then it was denied, it's pretty simple. If it was going for a tune or a mechanical service then sure it has to be expected. However it's going to get a bumper fixed. Regardless if the car is worth $50 or $500,000 it's the underlying principle and duty of care of the workshop to do the correct thing by the customer.

However, we have heard one side of the story and in the SAUWA court of law we require the defendent to speak lol.

Edited by monga

I asked a family member that works at a panel shop and used to own their own.

After washing the cars they ALWAYS take them for a test drive REGARDLESS of what panel work has been done, this is just to mkae sure its all running smooth when given back to the owner.

So when you consider one side of an industrial to the other and back or whatever 2k isnt that far off the mark. It also explains why they said they didnt take the car anywehere.

There we go, now everyone can unbunch their damn panties over this issue.

lol.. were they supposed to wash my car?? i wish they did!!! test drive for 2.5kms nd tht too over speed limit :happy:

I asked a family member that works at a panel shop and used to own their own.

After washing the cars they ALWAYS take them for a test drive REGARDLESS of what panel work has been done, this is just to mkae sure its all running smooth when given back to the owner.

So when you consider one side of an industrial to the other and back or whatever 2k isnt that far off the mark. It also explains why they said they didnt take the car anywehere.

There we go, now everyone can unbunch their damn panties over this issue.

i called these guys up and asked them if they needed to take the car to another location for work. they said no and denied any of the guys there taking the car out.

what can i do about this?

:blink:

well they sent out an info pack with some paperwork for me to fillout and return if i was to go ahead and file a complaint. they said if my claims were valid and they denied involvement even thought evidence proves otherwise, they would be in breach of some act (cant recall name). as for the pictures, their authenticity needs to be verified. Basically, if i wish to file a complaint, i am to confront the business via writing, if they dont respond or we cant reach an agreement, i can fill out the complaint form they sent out. then they will investigate the case.

there you go. you found out what you can do.

thread finished.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...