Rb25 Det Nistune Board

[Alexxs]

Anyone know the best place to buy one and get tuned in and around melbourne?

[bozodos]

AFAIK, you'll have to get a Z32 ECU to work with nistune - refer to my microtech removal thread!

[mad082]

as boz said, you can't put a nistune in the r33 board. you can either use a z32 ecu or a r32 ecu. with the r32 you lose the VCT though

[Rekin]

status tuning

http://www.statustuning.com/

He tuned my rb20 nistune for my r32.

You can purchase from him or direct from www.nistune.com

[mad082]

but he still has to get a different ecu first since the nistune boards don't work in a 33 ecu.

[Alexxs]

ah okay, so the general consensus is that i need to get a Z32 ecu to go with the Z32 afm and run that up instead of a Nistune?

i already have a z32 afm coming, so i was going t get them tuned together.

anyway thanks, Rekin ill give stats a call see what they have to say!

[Moodles2]

Nistune is a daughterboard that is installed inside an existing ECU. At the moment you can't use your current ECU because there is no Nistune board for it, as the others have said, R32 ECU + Nistune board is an option but you cannot retain your VCT, or the recommended option is the ECU from a Z32 VG30DETT + Nistune board and keep the VCT

[Alexxs]

Ah okay, lovely thanks Moodles2 thanks for clearing that up for me

thanks to everyone else as well, ill give status a call and see what they have to say about it.