Jump to content
SAU Community

Recommended Posts

Hi all.Had my 100k service done yesterday and all the sudden the powersteering is leaking like a sieve.Before the service i never had a drop of oil under my car in the garage in the 16 months i have owned it.I had the workshop change all the ancillary belts as well as the timing belt,water pump,bearings etc.Could they have done something wrong to cause this or is it an amazing coincidence?Does anyone have a powersteering pump in good condition they want to sell?

Link to comment
https://www.sau.com.au/forums/topic/287751-power-steering-pump/
Share on other sites

If it started happening straight after you got the car back from your mechanic you should take it back and tell them. If it's too late for that now (seeing as though you posted this a week ago) check the low pressure hose under the power steering pump and see if it's leaking there. Mine was leaking due to being old and cracked, it was only about $24 for the hose but really difficult to get to so I got my mechanic to do it while he was doing another couple of fiddly things for me and had everything apart.

Failing that, or even if it is the hose but you can't be bothered replacing it, try using a bottle of power steering pump sealant that you can buy from auto spare parts shops. I think I used the Nulon brand one (not 100% sure though) on one of my previous cars (VS Commodore), it started off as a slow leak that I never got around to fixing but when the car started to leak a puddle of fluid on the garage floor after parking it more than a couple of days I decided I needed to do something. I didn't expect the sealant stuff to work very well but afterwards it sealed it up 100% perfectly and was still totally sealed when I sold the car about 6 months later.

I would've tried the fluid sealant option on the GTR, but a new hose was only $24 and my mechanic already had the car in bits to do other stuff, so I figured I'd just do it properly.

it's probably just one of the hoses .. mine was leaking so was replaced but started leaking again after a few months due to the hose shrinking a bit from being new so the clamp loosened up a bit ..

The area where it leaks below may be deceiving .. mine was actually leaking all the way at the front from the hose but the oil was travelling down the hose and dropping on the ground all the way back near the firewall/oil sump.

I am guessing that it is leaking from where the large hose from the resevouir joins the pump; alternatively, if the mechanic had it off I am guessing that one of the washers for the hose at the top of the pump are missing (there shoud be four, one on the top and one on the bottom of each banjo fitting).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few more recent pics
    • full send the cnut, do this   fark the wrapping and/or stick on siet. These guys are the ones to go to: https://www.realthermo.com.au/  
    • Just had a look, they don't. Fuelling on the base map is purely alpha-N, and the ignition table is MAP. Remember it's just a base map to get the car moving  
    • Hi everyone, I’m Dave from Canberra. Here's a few pics of my 1992 R32 GTST coupe which I imported back in 2006. Only mods so far are HKS Hi-power cat back exhaust, K&N filter, ATC Volanti steering wheel, Pioneer stereo, amp and sub. This was my daily driver up until 2015 and sadly hasn’t been driven at all in the last 5 years due to marriage, work, and kids taking up most of my time and spare cash.As such its in need of a bit of TLC and one of my goals for this year is to get it back to running condition and maybe look into club/historic rego. I’ve joined SAU so I can ask a few questions along the way (although I promise to google Current Problem +SAU beforehand!)
    • From talking to the mx5 guys the NC doesn't actually need bonnet vents like the earlier NA and NB models, due to a better designed cooling system and undertray design There's plenty of them used as street cars and weekend track toys running anywhere from around 170 to 250kw with stock non vented bonnets, I initially was going to get some bonnet vents, but, as they are not actually required, I'll put vents on hold for a while and just monitor temps, though I do need to get something to actually monitor engine oil temps though, coolant temp can be pulled from the OBD2, but the oil gauge in the car is not actual oil temp, it is only a calculation based off coolant temp and RPM ☹️ They do recommend upgrading the radiator, which I have already done with a triple pass, and the only other thing they recommend for a street car is heat management, like I talked about above to protect bits in the engine bay from radiant heat, and to either replace the nearly 20 year old plastic coolant expansion tank, which I have done, or get a aftermarket alloy jobbie for some bling They did also say that if I wanted to track the car on occasion a oil cooler and sump baffle would be required, and as I already have had a sump baffle installed when the engine was out......... I'm going to get a oil cooler with a thermostat....... just in case I do eventually track the car, but probably not, but still maybe...🤪
×
×
  • Create New...