Jump to content
SAU Community

Recommended Posts

  • Replies 187
  • Created
  • Last Reply

Top Posters In This Topic

here are my photos from the day:

2009nov2303.jpg

2009nov2304.jpg

2009nov2305.jpg

i only managed a best of 1'23.9 in the Supra (PB = 1'23.1) and struggled with massive underbonnet temps (140'C after four laps) despite extra cooling mods (oil cooler, new radiator, extra thermo fan, more ducting) and new Brembo brakes. in hindsight, the rapid increase in temp and higher than normal boost levels recorded (1.5bar compared to the usual 1.2bar on track) with no improvement in speed or laptimes, were the early signs of my impending turbo failure - unfortunately this occurred on Tuesday morning when i went out again with the intention of breaking 1'22. interestingly, Trent (one of the instructors) only got 1'24.19 on a clear track when everyone went to lunch - he drove beautifully and it sounded like he was pushing hard, but analysis of that session reveals that my stock twins were already failing as we should have gone a lot faster. late braking and high corner speeds were let down by the lack of power on exit.

the fastest cars on the day that i know of were the R35 (a comfortable 1'22.08 - not bad for a four month old car after its first service!), the blue Evo IX (1'22.9 on street tires) and the black TT Supra (Dave with a stonking 1'23.13 on street tires). it's great to see that two Supras with stock turbos can put down some good 1'23 laptimes! ;) for the record, the stock R35 is good for 1'18 as Trent the instructor drove that laptime in it the next day.

for all those who couldn't attend - you missed out on an awesome event. the good news is that i will be running another trackday like this in March next year, so start planning now!

Edited by V35-2005

best times of the day (as far as i know)

1'22.08 - GUNR35

1'22.9 - Evo IX (Gav)

1'23.13 - Dave (Supra TT)

1'23.40 - Joshdc (R33 GTR)

1'23.7 - Damo (Supra V8 SC)

1'23.9 - me (Supra TT)

1'24.06 - writeoff (R32 GTR)

1'24.20 - heslo (R33 GTR)

1'24.67 - Red Back (R33 GTR)

1'25.9 - Jugz (R33 GTS-T)

1'27 - Moodles2 (R32 GTR)

1'28 - Steve (blue Supra NA)

1'29.3 - Bengi (Toyota Starlet)

1'30.3 - Nightcrawler (V35 Coupe)

1'31? - Brenton (Supra NA)

1'32.2 - Heslo+1 (Glenn, MX5)

1'34? - Matthew (black Supra NA)

DNF - 32godzilla (Stagea 260RS)

?? - 32godzilla's friend (blue R34 GT-T)

?? - Luke_ENR34 (R34 GT4)

?? - JTmiller (Lexus IS200)

1'22.08 - GUNR35

1'22.9 - Evo IX (Gav)

1'23.13 - Dave (Supra TT)

1'23.40 - Joshdc (R33 GTR)

1'23.7 - Damo (Supra V8 SC)

1'23.9 - me (Supra TT)

1'24.06 - writeoff (R32 GTR)

1'24.20 - heslo (R33 GTR)

1'24.67 - Red Back (R33 GTR)

1'25.9 - Jugz (R33 GTS-T)

1'27 - Moodles2 (R32 GTR)

1'28 - Steve (blue Supra NA)

1'29.3 - Bengi (Toyota Starlet)

1'30.3 - Nightcrawler (V35 Coupe)

1'31? - Brenton (Supra NA)

1'32.2 - Heslo+1 (Glenn, MX5)

1'33 - Luke_ENR34 (R34 GT4)

1'34? - Matthew (black Supra NA)

1'39 - JTmiller (Lexus IS200)

DNF - 32godzilla (Stagea 260RS)

?? - 32godzilla's friend Mark (blue R34 GT-T)

Hi,

I am Steve with the Blue Supra, Great to catch up with you guys!

Copied and pasted from SASupra:

Well done to everyone great day, thanks Kim for organising it. :)

Personally I was aiming for a 1:29 or a 1:28 as I saw darren "yiros" had got a best of 1:29.84 (fastest N/A as per his sig).

I just looked up that track day and saw that he did that on semi slicks so I am even more impressed that I did the 1:28 on street tyres!

All of the pics I took on my iphone failed??? So the only ones are a couple from my hand held digital. Here they are:

ready_for_track_001.jpg

on_track_001.jpg

trackday_001.jpg

trackday_002.jpg

trackday_003.jpg

trackday_004.jpg

trackday_005.jpg

trackday_006.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...