Jump to content
SAU Community

Recommended Posts

Was on the dyno today... and was chasing a issue.. no one noticed this...

I was puzzled so got someone else to drive the car on the dyno while i inspect the engine bay and guess what i saw?

man its times like this i love my job... i cannot stop laughing.

that is nasty. just imagine how much a restriction it must be to be able to suck itself shut. even if you put a rigid frame in it the restriction it's causing is huge. would be interesting to measure the vacuum in the intake pipe!

Want to thank you for this thread, I've just read it all and you're doing things lots if us wish we could!

All this talk of big fat 4wd's with monster snails is giving me some evil thoughts though!

Any idea where I can go to read and learn more about the particular requirements for each? Is the Toyota or Nissan a better place to start you reckon?

And your car, it has R34 Gtr diff gear in it. Yyyyyyyyucky! :)

  • 3 weeks later...

here the land cruiser 1fz and the nissan tb48 are just as popular as each other.

people like the nissan better because of the VCT, (they call them VTEK) and people like the land cruiser because when you build them they can take a massive amount of power and they are half the price of the vtek engines.

Just do exactly what you would do with a skyline except go for some big big cams and lower then 8:1 compression and get a gt45 turbo :)

R34 gtr ? damn.. can i just drop a r32 gtr diff into it?

Here is a car i tuned the other day... Starting to like Haltech more and more these days.

  • 2 weeks later...

nah the manuals are the strongest box's

I picked up a full r32 gtr rear diff today, it cost me $430 us, then a friend offered to help me go pick it up, and offered me a brand new set of tomei pro cams lash type 270s in box, 2 tomei cam gears in box and brand new 1.2 mm tomei head gasket for my old r34 diff, who was i to knock back his offer? and he actually gave me them... they are legit lol. its going on my rb30

Also when i was at the place today picking up the diff, i tripped over a Holden RB30 single cam with auto trans, i swear i had to look twice, i thought i pollymorphed into wrecking yard in sydney for a second and had to get my bearings back... WTF. and they only wanted $400 for it, it definatly came from Aus they knew what it was.

UAE is one big f**king surprise after the other i tell you, might go and pick it up next week, need to try convince the boss to use it for his drag car.

  • 1 month later...

Yes :)

Okay, i pretty much blew the GT35r, i drove it for a while when it was half gone and then it jammed and wouldnt even spin, and started spitting oil :(

This is my second GT35r on this car, they last less then 4 years, both turbos lasted 3 years each! sucks! is this normal for the BB GT series turbo's?

So i got a new list of parts to install the car, what a perfect time! do it all together!

Parts to go in motor!

Nissan Infinity Throttle Body and backing plate

Tomei adjustable cam gears x 2

Tomei 1.2mm head gasket (not needed)

Tomei 270 cams, hydro types (no springs as of yet going to try my luck the lift aint too much on them)

Bullseye 259 turbocharger

post-1240-0-93150700-1316211821_thumb.jpg

Removed plenum, did this job myself.. had no cars to tune that night

post-1240-0-25332200-1316211830_thumb.jpg

Throttle body plate welded to plazmaman plenum and nissan infinity throttle installed. its huge!!

post-1240-0-83870800-1316211837_thumb.jpg

Bye bye stock cams, we have been through alot together! Summernats, power cruise, WSID, 3 different countries, all kinds of street racing and drifting, 10.8 seconds at 135mph - time to move onto some upgrades, emissions tests not needed here!

post-1240-0-16500000-1316211848_thumb.jpg

Cams out!

post-1240-0-83751800-1316211861_thumb.jpg post-1240-0-40284900-1316211874_thumb.jpg

I decided to try my luck and find some parts to freshen up the cam train of the ol RB30DET, so i looked around, to my suprise i found some goodies to make everything back to new again! I could not believe it!!!

1x RB30DET cam belt, old stock Mitsubish diesel item, it had sooo much dust on it. (you wont find a RB25 one here but the 2530DET you can!)

1 x Timing belt tensioner

2 x cam front seals

1 x crank front seal

post-1240-0-86126000-1316212271_thumb.jpg

Total price??? 175 UAE Dirams, converted to english ?? $51.00 AUD. FIFTY 1 DOLLARS. WTF.. Nissan parts are sooo cheap here! You guys are getting ripped back home!

Also i snapped a cam cap bolt taking it out, the indians working in the shop found out, bring the big welder out and i start shitting the gear WTF?? they weld it up and put a bolt on it and remove it no problems, but finding a new bolt? i looked everywhere, called all the nissans and nothing.. then i had a silly idea to check if the nissan TB48DE cam bolts fit, and what do you know? EXACT FIT!!! but they have been changed and look stronger then the RB25 ones! and we have many of those in the spare bolts bin in the engine build room, WINNER!!!

New cams installed, and ready to put back together

post-1240-0-13783000-1316211884_thumb.jpg

Car should be running again, the turbo is a S259 bullseye, borg warner, i am after a good streetable drift setup, i hear from people with experience from this turbo that says on a cammed rb30det it should make full boost before 3000rpm and up to around 500rwhp, if so il be one happy man!

Stay tuned for more updates, might add some water meth injection also.

Anyone have any ideas what i should do with the solinoid of the VCT ? i want to remove the wires and use it for my water meth injection, can i just remove the solinoid and block it? leave it disconnected ? or connect it to ground perm?

if your not running vct just leave the solenoid in there unplugged. or a short bolt if you have one in the right thread, dont block up the oil gallery though as it feeds the front cam journal aswell as the vct

no results yet, still trying to get my hands on 5 litres of 300v competition oil before loading it up, the turbo sounds great! just like a t51r!

I know its not skyline related, but this is a car i tuned yesterday.

its a packed kit. do not have any pulleys for it.

the headers and free flowing exhaust apparently brings the boost down a little also.

we will get heads and get a pulley for it later on. depends on the customer

421rwhp on less then 20psi, car sounds great and it burns the tires pretty good =)

Got boost control issues, its not going up when i tell it to. need to investigate solinoid and hoses and fix a exhaust leak on the manifold.

is that good power for the s259 ? anyone know?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
    • Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe. Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time. Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.
    • You need to know I am sorry for this.  
    • As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1    
    • Nah. H2S. H2S is "rotten egg gas", which is what is associated with no cat. SO2 is equally nasty, and if you've ever smelt it you'll know all about it. More of a choking, acid in the back of the throat sort of thing. But you can only smell it in a narrow range up to about 1ppm. Above that, it irritates your mucous membranes, but you don't smell it.
×
×
  • Create New...