Jump to content
SAU Community

Recommended Posts

If you change your mind.

I have hks2530s on a stock manifold and im upgrading to a motec m800 and im looking for the hardpipe kit from turbo to airfilters off the turbos.

Do the turbos sit in the same place as a stock manifold would? i have mines stainless dump pipes off the turbos to a split veilside 2.5 inch front pipes to cat.

Intrested in the manifolds and hard pipes to turbos afmless.

Did you mount your bovs turbo side or use the stock pipe work and placement of the gtr bovs.

Let me know either way mate id even be intrested in a trade of stock manifolds/heatshields if you wanted to do it that ways plus cash your way.

Edited by Gtir-keiron
If you change your mind.

I have hks2530s on a stock manifold and im upgrading to a motec m800 and im looking for the hardpipe kit from turbo to airfilters off the turbos.

Do the turbos sit in the same place as a stock manifold would? i have mines stainless dump pipes off the turbos to a split veilside 2.5 inch front pipes to cat.

Intrested in the manifolds and hard pipes to turbos afmless.

Did you mount your bovs turbo side or use the stock pipe work and placement of the gtr bovs.

Let me know either way mate id even be intrested in a trade of stock manifolds/heatshields if you wanted to do it that ways plus cash your way.

hey mate, nah im not gona seperate the manifolds, ive already got buyers for for the turbos, hard pipe kit, dumps and front pipe.

i just gota wait till i pick them up during the week and meet up with all the buyers. if anything changes ill be in touch but everything seems to be gone atm

hey mate, nah im not gona seperate the manifolds, ive already got buyers for for the turbos, hard pipe kit, dumps and front pipe.

i just gota wait till i pick them up during the week and meet up with all the buyers. if anything changes ill be in touch but everything seems to be gone atm

Did this stuff sell mate im still keen as bro.

Just pulled my motor out for a clean up of the engine bay.

Let me know mate

!!!!!!!!!!!!!!!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My son has an R34 gt auto. I'm looking at methods on how to tune it with the view to be able to further tune it down the track when he is off his P,a and can go turbo. The issue is the 98 gt auto has a seperate TCM and is not compatible with swapping out a gtt auto nistuned pcm ( from what I have read so far ) Please if anyone has info on what to do here I would much appreciate. Realise that some options include manual swap, manualised valve body. Just hoping there is a more direct running option I haven't been able to find. Thanks in advance. 
    • Hi Everyone, I did 4.11 gears in my 34 GTR and only thing that remains is to fix the speedo reading (it reads about 15% higher) using the R33 GTR speedo sensor. Few questions:   1. Does the R33 speedo sensor fit right in to the 6sp getrag? I read it does but wanted to confirm because the speedo sensors between 33 and 34 look quite different   2. The connector on the 33 speedo sensor will not plug into the connector on the getrag. Do I just need to wire the pins together manually?  See pic: https://imgur.com/a/NTDzFe8
    • Does anyone know how I could find the part number for bolts used with  r34 with rb25detneo engine lower timing belt cover?   my timing cover was rubbed and i fixed it but upon putting the harmonic balancer i see the timing cover is almost rubbing and that is due to previous owners using general bolts and washer rather than the bolts per link below which sits inside the washer and pull the cover in   not sure if those bolts will fit rb25   https://www.ebay.co.uk/itm/326510870741?gad_source=1&gbraid=0AAAAAB_7XZxjuciMybdVOTShCs9857686&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338723872&toolid=20006&customid=7jIl12glAAAAVfHSSnyxAmSsdRxnAAAAAA
    • If the slightly higher internal EGR caused by a high flow cat causes detonation your tuner was way, way, way too aggressive to begin with. Timing scatter is a problem unless you go to a crank trigger, winter vs summer blend has different octane, list goes on.
×
×
  • Create New...