M35 Brembo Brake Coversion

[bbenny]

i havent taken it for a drive yet..

cars still on jacks got problems with the rear spacers gota sort that out

Any luck yet Danny?

[andy65b]

Any luck yet Danny?

I can tell you he has taken it for a drive and is very happy with the result.

I am sure he will post up all the info very soon.

[[[d a n n y]]]

sorry for the late reply

i got the brakes running in now

so far done abot 300kms on the weekend

overall impression feels like im driving my evo again when im punching the brakes lol

pretty damn good

pedal still feels abit abit too soft but doesnt feel dodgy though

ill wait and let my bank account recover and spend more money on it later

[zei20l]

how much pedal movement before you get them to bite?? more than the stockers i would imagine!

when you buy the new master, make sure the outputs are in the same places as the current one

[[[d a n n y]]]

got a R34 gtr 1 lined up

[zei20l]

before you remove the old one, make sure of the outlets!!! lol

[[[d a n n y]]]

well a 260rs is the same as a r34 gtr apparently

and they'll fit well i think lol

[zei20l]

yeah but an M35 is a different chassis. id be chasing a V35 brembo equipped one if you can find one......

[[[d a n n y]]]

http://translate.google.com.au/translate?h...N%26start%3D150

seems to be the same

[zei20l]

hahah thank link is more than i can read (and decipher) at work

but i believe you then! R34 is probably cheaper too!

[[[d a n n y]]]

425 brand new from NEESAN!!

[zei20l]

holy sheeeeeeet!!

just get one 2nd hand a replace the rubbers in it!

[[[d a n n y]]]

or 250 for a 350z @ the wreckers

Wat u recon

[zei20l]

only if its a brembo equipped Z33 one, id get that, would be a better chance of it being the same

[ironpaw]

Sorry to res this thread - but I've got the 350z brembos and want to get all the parts I need before fitting it.

So far, I've got the calipers. I'll get rotors and pads locally.

I've seen the master cylinder on ebay. Does all 350z have the same master cylinder or would brembo equipped z33's have different ones?

Also, brake lines from 350GT needed?

Too bad Danny doesn't come on the forums anymore...PM'ed him but no response

[Jetwreck]

I have Brembo's and my brakes are perfect....you don't need to upgrade the master cylinder.....you will have hassle's fitting the standard wheels though.....you use your brake lines.

P.S. Danny sold his car about 1 to 2 years ago....went to an IS250 or something.

[bbenny]

You may also need different caliper bolts for the rear.

Its been a year now since I did mine so I cant remember if it was front or rear that differed...

[ironpaw]

I have Brembo's and my brakes are perfect....you don't need to upgrade the master cylinder.....you will have hassle's fitting the standard wheels though.....you use your brake lines.

P.S. Danny sold his car about 1 to 2 years ago....went to an IS250 or something.

Hmm I'm planning on running 350z Track rims. 18 x 8 +30....would they clear?

Either that or GTR rims...18 x 9 +30....

[bbenny]

yeah either will clear fine

[rosella]

Hi all,

I've just purchased from the US via ebay a full set of brembos from a 2005 350Z anniversary edition including brake lines. Shipped Monday via UPS. Three boxes in total. One box weighing 45lbs containing the calipers and 4 rotors in 2 separate boxes each one weighing 40lbs. There is a new set of ceramic brake pads included and the existing pads have about 2K on them. According to the seller, all in excellent condition.

I've got Advan T7 18" wheels so should fit with no problems.

Now just got to find the time to install them. What with the sway bars and links from Daleo also. I've got some busy times ahead.

Rosella.