Jump to content
SAU Community

Recommended Posts

I pulled out my passenger seat to put in a GTR seat I just bought, and saw this box kinda thing coming out of the carpet with a plug that must have been plugged into something once. Does anyone have any idea what it is? I am very curious

post-63044-1253066669_thumb.jpg

not sure have a similar thing in my r33 s1, not sure whats it's for. I had a bit of a poke around with the multimeter with the interior light on, then the doors open, and with engine running and i couldn't detect any current.

I've got a SII Gtst and it has both drivers and passenger seat belt warning light harness, plus a cat temp sensor, so could be either, but I'd say seat belt. Logic tells me a cat temp sensor wire would be too bloody hot to go anywhere near flamable materials for at least a metre or so until it cools enough.

If it's the same as a R33 it's the plug for the cat temp sensor. The drivers side has the plug for the seatbelt.
If the car is a GTR, cat temp sensor, non-GTR who knows, most likely the seatbelt (I'm fairly sure only the GTRs have cat temp sensors?)

+1, cat temp sensor.

you can see that it has a stainless braid outside which is required for the heat resistance

nothing...unless its plugged in :D

it warns of high temp in the cat - ie cat blocked.

Yeah but where is the wire it plugs into!! Mine is the same as Pic with the tail but No connection to connect it into!!

Oh and what is that vent thing???? Been wondering about that to!

I checked after someone mentioned it was for the seatbelt and sure enough there is the other half of the plug coming from both the GTR seat and the GTS-t seat i pulled out, but I havent plugged it in yet. I might try tomorrow and see what happens.

Well I plugged it in and nothing happened, how anti-climatic. Kinda seems pointless. I also saw the cat sensor wire with the braided line nearby people were talking about.

I have no idea what it is but ill tell ya a funny trick

If ya fit airhorns under your passenger seat and wire it up to your glovebox

Then when casually cruising along with a friend oneday you ask them to get something out of the glovebox...

Absolutely priceless

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...