Jump to content
SAU Community

Recommended Posts

Hey guys,

I cant really decide on dump pipes. At the moment im throwing up between xforce, hks and tomei expremes.They range in price a fair bit,

My question is, is it worth spending the extra money to get the tomei's. Is it just build quality or do you think there would be any gains between to two.

Thanks guys,

Link to comment
https://www.sau.com.au/forums/topic/288265-which-dumps/
Share on other sites

Spend a bomb and get CES race dumps and front pipe. Boost response improved somewhat. If you haven't already you also get good boost response gains port-matching the manifold to turbo ports (on the manifold only with non stock turbos) like in pic.

post-48345-1253231473_thumb.jpg

post-48345-1253231575_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/288265-which-dumps/#findComment-4832960
Share on other sites

Spend a bomb and get CES race dumps and front pipe. Boost response improved somewhat. If you haven't already you also get good boost response gains port-matching the manifold to turbo ports (on the manifold only with non stock turbos) like in pic.

Have you used these Doo Doo. I rang up up about them, they sound great but pricey. From the impression I got regular aftermarket dumps could increase boost response on upgraded twins by about 300-500rpm, but these race pipes could increase boost response by 800rpm or more.

Anyone have any experience with these?

Link to comment
https://www.sau.com.au/forums/topic/288265-which-dumps/#findComment-4835485
Share on other sites

Have you used these Doo Doo. I rang up up about them, they sound great but pricey. From the impression I got regular aftermarket dumps could increase boost response on upgraded twins by about 300-500rpm, but these race pipes could increase boost response by 800rpm or more.

Anyone have any experience with these?

These are on the car at the mo, put them on with the stock turbos, pretty good result (awesome sound too). I have custom turbos that have the kick of 2540's but have boost (up to 12psi) from 3000rpm with full boost all in by 4000rpm.

Link to comment
https://www.sau.com.au/forums/topic/288265-which-dumps/#findComment-4835555
Share on other sites

Thanks Doo Doo.

They sound like the have a good result. I will defineately consider them. I will be using something with 2860-5's and from the sounds of it the race pipes and cam gears should dial out a lot of lag and increase response.

Link to comment
https://www.sau.com.au/forums/topic/288265-which-dumps/#findComment-4835684
Share on other sites

^^ Doo Doo,can you tell me more about the turbo's you are using?

They're a custom job not available off the shelf- my tuner had them made for his RB26dett powered Z- not sure who by, he won't tell me. They have the response of 2530's and lose 4hp on 2540's. His Z has about 540hp at the wheels with the boost response already posted (plus cams and gears, I think he's running about 20-22 psi) . When he got them in for me they were 1500 each brand new. Am switching to Motec (power FC does get a little reversion with this setup)

Thanks Doo Doo.

They sound like the have a good result. I will defineately consider them. I will be using something with 2860-5's and from the sounds of it the race pipes and cam gears should dial out a lot of lag and increase response.

Forgot to mention i have tomeii cams and gears dialled in for better response.

hey doo doo who made you piping

I did

Link to comment
https://www.sau.com.au/forums/topic/288265-which-dumps/#findComment-4836808
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...