Jump to content
SAU Community

Recommended Posts

My R32 gt-r is fitted with Apexi twin pods.

They are due for a replacement as they are very dirty.

I don't see much benefit in them as I believe they just suck in all the hot air from the engine and would much rather prefer a standard (modified???) panel filter box as per the way the GT-r must have come in stock form.

Should I go down this path? or should I invest in building/buying a cold air induction box and replace the apexi pods with new ones?

You could just clean them.

I went from my Apexi pod setup in my R33 back to stock Airbox with Apexi panel fillter. Due to the same reason. Sucking in the hot air.

Should see you 300kw without hindering.

Also stops the annoying hissing they constantly do :)

many people have tested both and most have found that keeping a stock setup and perhaps changing to a k n n panel filter would be the best way to go about it and especially if you under the 350awkw mark.. they more for "show" really unless you build a proper box.. i'd keep stock, less attention from police too!

if you like the sound, keep the pods; i cleaned my mates apexi's with some dishwashing detergent in water...repeated step until clean rinsed many time in clean water n hung out to dry for four or so hours.

if ur tired of the noise like i am, going back to the stock box works nicely; there is a change in the feel of the power curve - more violent with the pods and more smooth with the box; i test drive the car on a cold night with the box, then changed to the pods and the feel is definitely there.

I prefer the pods for that nice noise n surge of power but the box soon as im only aiming for 170-180awkw

grab a stock box from the private classifieds, maybe odify it a tad as its not as free flowing as the r34 gtr airbox

Yeah, I quite like the noise too :)

Maybe I should just build a cold air box....

Are the pods illegal though? I thought you were allowed one mod for the intake and one for the exhaust?

Yeah, I quite like the noise too :)

Maybe I should just build a cold air box....

Are the pods illegal though? I thought you were allowed one mod for the intake and one for the exhaust?

What else did you mod? The FMIC is standard. So its hardly a mod :)

  • 1 month later...

yes it gets rid of most of it.

you will hear a little noise, but definitely not a WOOSH noise on boost.

i went from air box to pods, i initially liked it and so did everyone that i took in the car. but after a while i got sick of it, and mainly sick of explaining to the police that it isnt illegal. so i returned it to stock.

still is producing same power, it just doesnt go woosh then psssh anymore.

Brezza

pod filter are good for the first week if that, i was excited to hear the noise because its my first turbo and thaught it sounded good. got sick of the sound though, too much like a radio with no signal...

I just put a stock airbox back on after running pods for 5 years. Really don't lose anything except a little extra noise and just made 245kw at 14psi. As already pointed out the airbox is actually better unless you have a decent cold air setup and certainly helps in vic if you want less attention with respect to law enforcement :).

  • 2 months later...
  • 4 months later...
hey guys i got one of those stupid yellow stickers on my car but am having a hard time getting a hold of a stock air box for my r32 can any one help me out?

Put up a post in the Wanted to buy section. Thats how i got mine. In addition, look through the classified car parts section. You'll find one sooner or later.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I personally would run 2x from the cam covers into the catch can, 1x sump vent to catch can (would mount this at a low point of the catch can, so it can also act as a drain). I would see if you can run a -12AN down there to improve venting and also draining. The head drain thing, just drain that back to the sump on the other side. Catch can to be vented, unless you plumb or back to the intake.
    • Yeah the head "drain" is rather a sump/crank case vent. My catch can stopped filling up after venting the sump to the catch can. I have 4x fittings in mine, which is about 5Ls. 2x cam, 1x sump vent/catch can drain, 1x fitting back to the intake and a massive breather which can be blocked so it's a fully sealed system.
    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
×
×
  • Create New...